Mixing Desk

Tue, 31 Aug 2021 16:59:19 GMT

go to see Welding Machine for Mixing Desk

Hey fellas/ladies,I am going to make a mixing desk for my church. It will hold a mixer, tape deck, wireless gear and various other things weighing a total of about 100 lbs. I plan on it having a couple shelves and a two level table top for easy access to equipment.I am planning on making it from square tube, but not sure what size to use. I was thinking 1" x 1/4 tube would be fine and hold the weight, but want to make sure with the experts here. If I drop the mixer I'll be broke for a long time! Lincoln AC-225
Reply:That's some heavy tubing, it should hold up no problem. I have a steel rack behind the shop made from 1" tubing with about 1/16" wall thickness. It must have 800lbs of steel on it.
Reply:Cool. I didn't know for sure how much weight a given tube would hold. Thanks Joe!Lincoln AC-225
Reply:A bit depends on the design of the shelf unit and how things are attached and where the weight is hanging.For a 'table' with four legs, cross-pieces horizontally connecting the legs, and the shelves on top of the cross-pieces, 1 inch square tube with a wall thickness of 1/16 to 1/8 inch will be plenty strong to hold 100 pounds of equipment, especially spread out across a few different shelves on the rack.A cantilever shelf sticking out three feet from the uprights with the 100 pounds at the farthest edge from the upright would probably need a little bit bigger and stronger material and weld.

Spot Welder for Mixing Desk,Spot Welding Machine for Mixing Desk, Laser Welder for Mixing Desk, Laser Welding Machine for Mixing Desk,Spot Welder manufacturer in China, Mixing Desk Laser Welder manufacturer from China
go to see Welding Machine for Mixing Desk