Something doesn't seem safe about this...
Tue, 31 Aug 2021 16:45:34 GMT
I hope this isn't a repost.I found this on another forum and I'm pretty sure it is an unsafe work environment..hahHobart Handler 187Bainbridge bandsawMakita chop sawHarbor Freight 4.5" grinder
Reply:He keeps welding on top of the news paper he won't have to worry about the electrical fire as he will start one right there. But come on how hard would it have been to get the right plug and wire it up? Then again looking at those welds this one needs lots of serious help.
Reply:Im speechless lolYa gotta spend money to make money!
Reply:Surely it IS a crime to treat such a fine machine like that. Think of the embarrasment that Miller has gone through!
Reply:WOWthats all that comes to mindIf it's too . get an office jobLincoln wp225g7 Lincoln 250 idealarcFrankenstein O/A set-up Weld-tech tig set-upLincoln sp 175 plus profax arc gouger
Reply:Hey! Where did you get pictures of my shop??
Reply:Originally Posted by JC'sWeldingHey! Where did you get pictures of my shop??
Reply:That's a fire inspectors and OSHA nightmare.And those welds I take it the same persone that did that wiring job tried their hand at welding?Co-Own CNC shop:Miller :1251 plasma cutter, MaxStar 700 TIG/Stick, & XMT 456 Multiprocess Welder.& 2 Hypertherm HPR260's Plasma CutterSorry I had a bad stroke but now I am back.
Reply:Originally Posted by papabearHope that's not a picture of your work too. lol. On another note; YIKES!!
Reply:Originally Posted by JC'sWeldingHeck no! This guy must be single. No woman in her right mind would let her husband weld in the house, on top of newspaper, with the refrigerator unplugged.
Reply:His electrical skills equall his welding skills.Tough as nails and damn near as smart
Reply:What scares me is...He's so proud of both his wiring and welding skills that he actually took pictures of both....He should stick to taking pictures...they're real good pics!!
Reply:cool, i see billy-bob's exhaust works and catering is back in business.plenty tough and union made.
Reply:At least it looks like he is welding in the bathroom where a vent is probably installed...haha Can anyone see what the welder is set at? Maybe this guy needs advice for a good setting to weld exhaust?Hobart Handler 187Bainbridge bandsawMakita chop sawHarbor Freight 4.5" grinder
Reply:Why not just weld on the kitchen table ? Use a cookie sheet!!
Reply:Anybody stupid enough to work like that pretty much gets what they deserve.
Reply:I believe that is actually the oven that is unplugged. The fridge is only 120
Reply:I'm betting that it's a rental. That's someone else's property. 9-11-2001......We Will Never ForgetRetired desk jockey. Hobby weldor with a little training. Craftsman O/A---Flat, Vert, Ovhd, Horz. Miller Syncrowave 250
Reply:You can tell it's in Europe somewhere from the shape of the plug.
Reply:Originally Posted by papabearSo, I take it; your married. (Sucks, doesn't it?)
Reply:Hmmm...I could be wrong, but... Attached ImagesCity of L.A. Structural; Manual & Semi-Automatic;"Surely there is a mine for silver, and a place where gold is refined. Iron is taken from the earth, and copper is smelted from ore."Job 28:1,2Lincoln, Miller, Victor & ISV BibleDanny
Reply:anybody else notice the box of kleenex on the stove?
Reply:I still amazes me what people will do to short cut a project . The newspaper , the electrical hookup , welding in the house . The high pressure cylinder is not chained either . I have seen 1st hand what happens if a valve is damaged .
Reply:At least he's not welding on the carpet.Tough as nails and damn near as smart
Reply:Or welding THE carpetAnyone that keeps a quart of mustard that near the stove and a frig magnet of a schooner of beer can't be all bad.
Reply:Originally Posted by JC'sWeldingYou can tell it's in Europe somewhere from the shape of the plug.
Reply:Ya gotta Post the Link to the ForumEd Conleyhttp://www.screamingbroccoli.com/MM252MM211 (Sold)Passport Plus & Spool gunLincoln SP135 Plus- (Gone to a good home)Klutch 120v Plasma cutterSO 2020 benderBeer in the fridge
Reply:from to in 60 seconds.
Reply:Originally Posted by Broccoli1USAI believe it is just a 14-50R turned sideways
Reply:Originally Posted by Boostinjdmanybody else notice the box of kleenex on the stove?
Reply:Someone should tell him ,the bed is a better height to weld on.Robert
Spot Welder for
Something doesn't seem safe about this...,Spot Welding Machine for
Something doesn't seem safe about this..., Laser Welder for
Something doesn't seem safe about this..., Laser Welding Machine for
Something doesn't seem safe about this...,Spot Welder manufacturer in China,
Something doesn't seem safe about this... Laser Welder manufacturer from China
go to see
Welding Machine for Something doesn't seem safe about this...
