Regulator barb fitting

Tue, 31 Aug 2021 16:45:33 GMT

go to see Welding Machine for Regulator barb fitting

I finally got a C25 cylinder.  The regulator that came with welder has a barb fitting for the feed.Is this OK to use or will there be too much pressure?  It seems to be a threaded connection would be better.  Any have experience using the barb?Hobart Handler 187Bainbridge bandsawMakita chop sawHarbor Freight 4.5" grinder
Reply:The barb fitting is fine as long as you use some kind of hose clamp. Without a hose clamp the pressure may blow it off as you said,OAdoctorwww.regulatortorchrepair.com
Reply:Originally Posted by OAdoctorThe barb fitting is fine as long as you use some kind of hose clamp. Without a hose clamp the pressure may blow it off as you said,

Spot Welder for Regulator barb fitting,Spot Welding Machine for Regulator barb fitting, Laser Welder for Regulator barb fitting, Laser Welding Machine for Regulator barb fitting,Spot Welder manufacturer in China, Regulator barb fitting Laser Welder manufacturer from China
go to see Welding Machine for Regulator barb fitting