looks to be a neat old hobart gas powered welder

Tue, 31 Aug 2021 09:15:40 GMT

go to see Welding Machine for looks to be a neat old hobart gas powered welder

http://sacramento.craigslist.org/tls/3817399785.htmlMiller TrailBlazer 301Miller 12rc feederMiller ShopmasterMiller 22a feederPlasmaCam CNC TableHypertherm 45 cutterDrills, saws, blast cabinets etc.
Reply:... is 'obart' obamas' brother??
Replyooks like a g-213 with a different wisconsin than it originally had. Every one I have seen has a TJD with electric start. The two leads running out the back of the weld end towards the engine are for the hour meter. Good machines. I have one that gets used regularly
Reply:G-213 as stated, lot of copper in there, check the ceramic pieces that insulate the resistor. it is a flat wire coil inside the unit , you can see it through the vent screen on the side, the fan blows over it to keep it cool, If it has been dropped while loading it can be destroyed and electrical parts for these are not available new, very limited used. As stated very good welding machine, pushing 700lbs."Si Vis Pacem Para Bellum"Lincoln Idealarc 250 AC/DCMillermatic 251   Syncrowave 300   30A spoolgunLincoln MP210Hypertherm 45(2) LN 25(2) Lincoln Weldanpower 225 CV(4) SA200   1 short hood    SA250    SAM 400