Cheater Lens ?

Tue, 31 Aug 2021 15:49:41 GMT

go to see Welding Machine for Cheater Lens ?

How  does the cheater lens go? It has two different sides. With the flat part out facing the work piece ? I hope I am explaining myself correctly.
Reply:I don't know if there is a right or wrong, but I wear mine with the flat towards my face, between the speedglas module and the outer clear lens. I'm interested to see what others say as well.
Reply:I always put mine on the inside of the helmet.  With the flat side to me.From the desk of Kevin CaronTrying to be the best me I can!www.kevincaron.comAHP Alpha Tig 200x MillerMatic 251Miller Syncrowave 200
Reply:Flat side to the lense. Curved parts to your face. Sometimes it goes both ways, but for the most part they fit better with curves out.Weld like a "WELDOR", not a wel-"DERR" MillerDynasty700DX,Dynasty350DX4ea,Dynasty200DX,Li  ncolnSW200-2ea.,MillerMatic350P,MillerMatic200w/spoolgun,MKCobraMig260,Lincoln SP-170T,PlasmaCam/Hypertherm1250,HFProTig2ea,MigMax1ea.
Reply:I wear mine with the flat side towards the work piece.I am gonn try both ways.I have mine velcroed to the outside of one of my helmets.On my Miller I snap inside.
Reply:I run mine with curved part toward the word.  They fit well in my Speedglas hood.-AaronJet 17.5" Drill Press1942 South Bend 16x84 Lathe1980s Miller 320A / BP --- 2013 Power Mig 2562012 Jet 7x12 Horizontal BandsawVictor O/A Setup
Reply:From Miller's Digital Elite Owner's Manual, page 15:1 Optional Magnifying LensStarting at the top, slide magnifyinglens into the helmet retaining brackets.Align the magnifying lens withthe auto-darkening lens assembly.Reverse procedure to removemagnifying lens. To prevent lens fogging, installflat side of magnifying lens towardauto-darkening lens.Burt _____________________Miller Syncrowave 250Millermatic 211Miller 375 Plasma Cutter Hobart Handler 12010FtDrillBit.com