put the stick holder in it and change it to stick mode ? what else am I for getting?
Reply:You can't read the owners manual!?Output? I think it defaults off of on when you turn the machine off.Last edited by mikecwik; 08-23-2013 at 08:31 AM.
Reply:My Maxstar 200 defaults to remote on start up even when switched to stick mode. I constantly have to remind myself to push the button to take it out of remote as well as switch it to stick..No government ever voluntarily reduces itself in size. Government programs, once launched, never disappear. Actually, a government bureau is the nearest thing to eternal life we'll ever see on this earth! Ronald Reagan
Reply
Bigrich954rr - set the 200DX as follows for basic DCEP stick:* Stinger DINSE (Electrode Weld Output Terminal)* Ground DINSE (Work Weld Output Terminal)* "
olarity" on DC* "
rocess" on Stick* "Output" to ON* "Dig" from 0 to 100 (electrode/material dependent)The "200" runs 7018, 7014, and 6011 very/very well."Discovery is to see what everybody else has seen, and to think what nobody else has thought" - Albert Szent-Gyorgyi
Reply:I don't have the manual with me. I had the quick card but that didn't help. Ok I must of mess up output on part . Thanks I will try again later . I was trying to blow out some fast welds outside . Just got pissed off and went with a high cfm and high Amps tig I will be posting a pic in a different topic cause the weld passed a bend test but looks smooth Lo
Reply:I thought it was a pain to learn the machine. Good luck with it.
Reply:I thought it was a pain to learn the machine. Good luck with it.
Reply:Originally Posted by Bigrich954rrI don't have the manual with me.
Reply:Originally Posted by mikecwikI thought it was a pain to learn the machine. Good luck with it.
Reply
k finally stick welded with the miller 200dx that output button was key.I was burning 6011 1/8 at 85 amp with 50ft or 1/0 power and 50ft of 2/0 ground I don't know why but it was crazy hotter then my old Lincoln arc boxI started at 115 and It was cooking the metal so I had to keep lower the amps till I was using 80-85 and I didn't stick to the base metal once were my older one sucks to weld under 100 amps.I love to stick with this welder but it going to take a while to get use to it , also to get use to stick welding again as all ive been doing for the last 3 years is tigLast edited by Bigrich954rr; 09-01-2013 at 02:25 AM.
Spot Welder for
why cant i stick weld with my Dynasty 200 DX,Spot Welding Machine for
why cant i stick weld with my Dynasty 200 DX, Laser Welder for
why cant i stick weld with my Dynasty 200 DX, Laser Welding Machine for
why cant i stick weld with my Dynasty 200 DX,Spot Welder manufacturer in China,
why cant i stick weld with my Dynasty 200 DX Laser Welder manufacturer from China
go to see
Welding Machine for why cant i stick weld with my Dynasty 200 DX