Lincoln ranger 250 won't weld

Tue, 31 Aug 2021 10:05:43 GMT

go to see Welding Machine for Lincoln ranger 250 won't weld

Newer Lincoln ranger 250 with only 200 hours on it. I was doing a job and burnt probably three 6010s getting things tacked up.Then it broke down on me it will arc but it will not weld you can have it set all the way maxed out to 250 and it won't burn a 3/32 7018 but it will hold and arc if that makes since. Any help will be appreciated Sent from my SAMSUNG-SM-G870A using Tapatalk
Reply:Could be a number of things from a poor harness-to-board connection to a faulty weld output current sensor to failed IGBT module . . .Unit Code#?MM200 w/Spoolmatic 1Syncrowave 180SDBobcat 225G Plus - LP/NGMUTT Suitcase WirefeederWC-1S/Spoolmatic 1HF-251D-1PakMaster 100XL '68 Red Face Code #6633 projectStar Jet 21-110Save Second Base!
Reply:Unit code ? I'm not for sure what that is ?Sent from my SAMSUNG-SM-G870A using Tapatalk
Reply:There's a Code# on the faceplate of the machine along with the Serial Number.  The Code# is needed to get the correct manual(s) for the unit.MM200 w/Spoolmatic 1Syncrowave 180SDBobcat 225G Plus - LP/NGMUTT Suitcase WirefeederWC-1S/Spoolmatic 1HF-251D-1PakMaster 100XL '68 Red Face Code #6633 projectStar Jet 21-110Save Second Base!
Reply:Okay I will do that tomorrow thank you Sent from my SAMSUNG-SM-G870A using Tapatalk
Replyid you find out what was wrong with yours because mine is kinda doing the same thing.
Reply:Yea I know a retired electrical engineer and he tore through it and just cleaned all of the connections and replaced one and now it runs great I hope that helps Sent from my SAMSUNG-SM-G870A using Tapatalk