PU205 60amp Plasma Torch Ceramic Collars?

Tue, 31 Aug 2021 09:40:11 GMT

go to see Welding Machine for PU205 60amp Plasma Torch Ceramic Collars?

I'm looking for some extra ceramic collars for my PowerUltra 205 60amp Plasma Torch. Only problem is what it came with and what shows as the consumables on the site appear to be different.What it came with was the taller cone with the rib in the middle for mounting the wire standoff guide, and the end of it sticks about halfway to the end of the nozzle like what's in this picture: http://www.everlastgenerators.com/pr...ails/318_7.jpgThe consumables all seem to be the shorter cone without the ridge for the wire standoff guide and don't cover nearly any of the nozzle like this:http://www.everlastgenerators.com/pr...ails/592_1.jpgI got some of the 2nd ones, and while they're supposed to work on my torch they don't screw on. The thickness of the base of the cone is a hair too thick, and as a result it won't go over a slight ridge at the base of the head of the torch.So a) I'm looking for the cone that I can use with the wire standoff guide, and b) I'm looking for something that'll fit Anybody know where to get the longer cone with the ridge for the guide? Everlast, eBay, elsewhere?ThanksRalph
Reply:Call Everlast USA and they should have them . If not we have lots in Stock here in CanadaCheers
Reply:Hello  ralphhood3  please pm me your addressolegOleg [email protected]/650 588 8588 x201www.linkedin.com/pub/oleg-gladshteyn/48/b08/875