everlast 7 pin connector

Tue, 31 Aug 2021 09:40:10 GMT

go to see Welding Machine for everlast 7 pin connector

Hi Has anybody found where to but the 7 pin connecter that everlast uses on their welders??I want to use a straight plasma cutter torch and I need to have the correct plug to connect to the welder.Thanks Tom
Reply:Tom,What are you trying to do exactly? A "straight" plasma cutter torch...can you define?Esab Migmaster 250Lincoln SA 200Lincoln Ranger 8Smith Oxy Fuel setupEverlast PowerPlasma 80Everlast Power iMIG 160Everlast Power iMIG 205 Everlast Power iMIG 140EEverlast PowerARC 300Everlast PowerARC 140STEverlast PowerTIG 255EXT
Reply:I have a flame pattern cutter and I want to convert it to use a plasma cutter.I have a PM256 (60 amp plasma) and I want to buy another torch to use.  So I need to have a way to connect the new torch (start switch) to the welder.  The simple way is to get a new 7 pin connector for the leads on the new torch to connect to the everlast welder/plasma.This will allow me to use the standard plasma torch that came with the unit normally and also use the pattern cutter as seperate tools.Have funTom
Reply:Unless it is something thin and will be used at lower amps, I would not recommend you use the PPro 256 for this application due to its 35% duty cycle, unless you intend to operate it within the 30-40 amp range.Esab Migmaster 250Lincoln SA 200Lincoln Ranger 8Smith Oxy Fuel setupEverlast PowerPlasma 80Everlast Power iMIG 160Everlast Power iMIG 205 Everlast Power iMIG 140EEverlast PowerARC 300Everlast PowerARC 140STEverlast PowerTIG 255EXT
Reply:Found on our forum herehttp://www.everlastgenerators.com/fo...=2983#post2983Last post:http://cgi.ebay.com/ws/eBayISAPI.dll...m=390146071306$10 for both ends.Mike R.
Reply:Thanks for the reply on the plug.  And most of the cutting I will be doing is 1/4" or 3/8" plate and small parts on a single off type.  Under those conditions I think the PM256 should work fine.  Have funTom
Reply:HI I ordered the 7 pin connectors from [email protected] Before I was told the Ebay had them basically the same price.  About 6-day delivery.Thanks againTom