Oops! One for duane55

Tue, 31 Aug 2021 09:35:50 GMT

go to see Welding Machine for Oops! One for duane55

Well duane, it happened.  I thought of you the second the stud snappedTook one of these.  To do one of these  So I got smart  And out the other one came with an impact.  Dab of 7018 on the nut/stud. Wish I'd of done it for the first one.  Now I have a small mining operation on my hands "Any day above ground is a good day"http://www.farmersamm.com/
Reply:A bit of flame on the boss around the first stud might have prevented it from snapping off, don't ya think?Once you have a nut welded to the broken stud a bit of flame on the boss will still work in your favor.But you already know that.- MondoMember, AWSLincoln ProMIG 140Lincoln AC TombstoneCraftsman Lathe 12 x 24 c1935Atlas MFC Horizontal MillCraftsman Commercial Lathe 12 x 36 c1970- - - I'll just keep on keepin' on.
Reply:Reverse twist drill bits Samm. Get about 3 different sizes and work your way up to that 1/2 inch? stud. Get an xtra one for the starter dril and remember to put your drill motor in reverse.Last edited by Insaneride; 12-29-2012 at 08:32 PM.Reason: remember to not forget
Reply:be glad its not a cat.  they seemed to LOVE breaking exaust studs and they were a stone cold bitch to remove and replace.I take it you have decided to replace the turbo?Vantage 500's LN-25's, VI-400's, cobramatics, Miller migs, synch 350 LX, Powcon inverters, XMT's, 250 Ton Acurrpress 12' brake, 1/4" 10' Atlantic shear,Koikie plasma table W/ esab plasmas. marvel & hyd-mech saws, pirrana & metal muncher punches.
Reply:Originally Posted by Dualiebe glad its not a cat.  they seemed to LOVE breaking exaust studs and they were a stone cold bitch to remove and replace.I take it you have decided to replace the turbo?
Reply:Sam what's the doodad grippy thing in the first pic? Never seen that before.Bruce
Reply:Just wait till you see what Cummins studs cost.
Reply:Originally Posted by Bruce AvisonSam what's the doodad grippy thing in the first pic? Never seen that before.Bruce