Wisconsin engine on a Lincoln Weldanpower

Tue, 31 Aug 2021 09:35:50 GMT

go to see Welding Machine for Wisconsin engine on a Lincoln Weldanpower

Good Evening,  Earlier today I picked up a Welenpower 225 AC only model.  It ran great when I picked it up from the fellow selling it. When transporting the welder home my ratchet strap slipped and knocked one of the wires out of the magneto that leads to the spark plug. I plugged it back in but now the welder won't crank. I am by know means a mechanic so I'm curious if I need to take the magneto apart or do the wires just plug in the front. Thanks in advance and happy new year. I can post pictures in the morning when it gets light out. Sent from my DROID RAZR using Tapatalk 2Hobart Stick mate LX AC/DCHarris O/A outfit
Reply:Ok  the spark plug wires screw into a screw built into the mag cap pushing them in won't work. Check the wire see if stainless wires are showing if not trim off and screw it back on. Take plug in put on old plug hold to side of block  crank over plug should spark.
Reply:Thank you for the tip. I will try it in the morning. :beer:Sent from my DROID RAZR using Tapatalk 2Hobart Stick mate LX AC/DCHarris O/A outfit