Mystery Gauge

Tue, 31 Aug 2021 09:35:50 GMT

go to see Welding Machine for Mystery Gauge

What is this?I found this when cleaning a widow's cellar.  All brass, Each section can be removed from the tree and used independently.   The units present are marked 2 through 15, small to large.  There was no # 1 or # 0 present.# 2 is about 2 - 3/16 across, # 15 is about 2 - 13/16 across.  I seem to recall seeing a photo of one of these gizmos once before but I can't recall where.- MondoMember, AWSLincoln ProMIG 140Lincoln AC TombstoneCraftsman Lathe 12 x 24 c1935Atlas MFC Horizontal MillCraftsman Commercial Lathe 12 x 36 c1970- - - I'll just keep on keepin' on.
Reply:I have used a set very similar, They were used to hand cut holes through thin cork or rubber sheet to make gaskets or sealing washers.Lincoln SP-170 MigHypertherm powermax 45Lorch T220 AC/DC TigButters FM 215 synergic MigKemppi 180 adaptive mig RULES ARE FOR THE OBEDIENCE OF FOOLS AND THE  GUIDANCE OF WISE MEN.
Replyike Gordon says.I have used a similar sort of set to punch holes in rubber stoppers for chemistry class.RogerOld, Tired, and GRUMPYSalesman will call, Batteries not included, Assembly is required, and FREE ADVICE IS WORTH EXACTLY WHAT YOU PAY FOR IT!Dial Arc 250HFThunderbolt 225 AC/DCAssorted A/O torches
Reply:Gasket punch set??? ! ! ! ! I never would have guessed that. I though it was some sort of gauge set.Thanks! - MondoMember, AWSLincoln ProMIG 140Lincoln AC TombstoneCraftsman Lathe 12 x 24 c1935Atlas MFC Horizontal MillCraftsman Commercial Lathe 12 x 36 c1970- - - I'll just keep on keepin' on.
Reply:Originally Posted by Rog02I have used a similar sort of set to punch holes in rubber stoppers for chemistry class.