Another maybe dumb question about Everlast inverter welder and cable connectors

Tue, 31 Aug 2021 08:59:48 GMT

go to see Welding Machine for Another maybe dumb question about Everlast inverter welder and cable connectors

OK machine Everlast 141 STL.  Cable length in manual states length 25 feet. I have 1 awg cable and plan to connect with tweco connectors or whatever you call a "regular" cable connector.  I never new what a Dinse was till I bought the Everlast.  After turning down on lathe to make a adapter. Reason I ask is that's a pretty hefty chunk of brass with hefty cable and I know a "regular" welding machine likes big connectors and big cable but what about the inverter machines. I ask similar question before and didn't really understand the reply. So basically can I use what I have with the 141 or do I need to buy some smaller cable and connectors. Thanks
Reply:I would think it's just a dinse 25, 1awg cable is to heavy I would think a 15' #4 with a small dinse 25 and a small 125/150 stinger
Reply:Yes you can use the 1awg cable with the 141. It is bigger than needed but it will not hurt anything.
Reply:Just buy an adapter or put a Dinse plug on your existing cable. Sent from my iPad using Tapatalk:
Reply:Originally Posted by Lis2323Just buy an adapter or put a Dinse plug on your existing cable. Sent from my iPad using Tapatalk
Reply:Originally Posted by mechanic416You do know this thread is over 2 years old.
Reply:Originally Posted by mechanic416You do know this thread is over 2 years old.
Reply:Originally Posted by ronsiiIt was a test to see how many other guys would notice the thread date