Discuz! Board

 找回密码
 立即注册
搜索
热搜: 活动 交友 discuz
查看: 9|回复: 0

Passed my AWS D1.5 Bridge cert

[复制链接]

9万

主题

9万

帖子

29万

积分

论坛元老

Rank: 8Rank: 8

积分
293221
发表于 2021-9-1 00:42:19 | 显示全部楼层 |阅读模式
Well it was a very long weekend.  I took a 370 mile, 16 hour round trip to take my AWS D1.5 Bridge welding test.  Why did I drive so far, well it would be 2 weeks to get an appointment anywhere else and it was $250 cheaper than the next lowest price.  Plus I been taking a pipe welding class there too.  Since I had a diaster filled week, I never got a chance to practice welding with 5/32" 7018 before driving there for the test.  So I made a practice piece on 1/2" plate right before they tested me.  So it made me so nervious taking a test with rod I have never used before on overhead on steel so thick.  If you know about the bridge test, you're not premitted to use anytools other than a chipping hammer and a hand wire brush.  So if you screw up, you fail.  Talk about pressure.  Takes forever to clean each pass.  It took me 2.5 hours to weld up the two test plates.  I passed my G3 test and G4 test.  So I am now certified on unlimited thickness steel.  YAHOO!!!!!!!!!!!!!Now I got my bargining chip for this welding work a company wants me to do on a bridge.   Will be a nice winter job for me and my buddy who also took the test.Lincoln 300 Vantage 2008300 Commander 1999SA250 1999SA200 1968Miller Syncrowave 200XMT350MPA/S-52E/xr-15Xtreme 12vs Millermatic 251 w/30A  Millermatic 251 Dialarc 250 Hypertherm 1250 GEKA & Bantom Ironwokers
Reply:No sweat, bet you did it with one eye closed and one handed! Congrats!City of L.A. Structural; Manual & Semi-Automatic;"Surely there is a mine for silver, and a place where gold is refined. Iron is taken from the earth, and copper is smelted from ore."Job 28:1,2Lincoln, Miller, Victor & ISV BibleDanny
Reply:Congradulations!!!  All of the previous practices and hard work have paid off!  A few of my toys !LinuxMintManjaroMiller Roughneck 2E Lincoln WeldPak 100HTP MTS 160 Chicago Electric 80amp Inverter   Victor O/A
Reply:Congrats!  Bet that bigger rod was fun on the overhead! LOLMM350P/Python/Q300MM175/Q300DialarcHFHTP MIG200PowCon300SMHypertherm380ThermalArc185Purox oaF350CrewCab4x4LoadNGo utilitybedBobcat250XMT304/Optima/SpoolmaticSuitcase12RC/Q300Suitcase8RC/Q400Passport/Q300Smith op
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver|小黑屋|DiscuzX

GMT+8, 2025-12-20 21:57 , Processed in 0.070839 second(s), 18 queries .

Powered by Discuz! X3.4

Copyright © 2001-2021, Tencent Cloud.

快速回复 返回顶部 返回列表