Out of the depth's of the "Magic Garage"

admin

Here is some of the stuff from the Magic Garage First the welder "Remuda" ( for you Texas guys )MM210, Spectrum 375 and A/O uotfit, SD180, and Ranger 8 Attached Images
Reply:My old South bend 13" lathe from the forties Attached Images
Reply:Three phase power converter panel I built for the lathe Attached Images
Reply:My fitty buck compressor, that I bought with a burn't up motor.I put a new motor on it.When the pump goes, I have a Sailor-Bell two stage that I going to rebuild, (it has a knock) and replace it with. Attached Images
Reply:My HF bead blaster Attached Images
Reply:My mill/drill with Kurt clone vise Attached Images
Reply:I have two of these rotoray storage bins I bought at HF (of course) for 20 bucks each. they are very handy. Attached Images
Reply:Here's a face plate I made for the lathe. Attached Images
Reply:Here's my 20 ton HF press. I was going to build one. But I couldn't get the materials for what I paid for thisOOPS!!! I got ahead of my self and forget the picture
Reply:Here it is Attached Images
Reply:Last for now Here's a 10" grinder I bought at a yard sale.I do some more later if any one is still interested. There's much more in the "Magic Garage Attached Images
Reply:Definately interested, keep it up.I love looking at the pics, some nice stuff you got there!
Reply:Jim, just one question? Where is the portal door? Wha' door you ask? Why the portal to the other dimension your pulling that stuff out of.  And I thought mine was crowded, I've only just begun to fold space like you have...lol.
Reply:Jim.....nice set up ....Sure need a Mill....Do u use the a lot?Robert D
Reply:Originally posted by fla jim Last for now Here's a 10" grinder I bought at a yard sale.I do some more later if any one is still interested. There's much more in the "Magic Garage
Reply:Hobweld; I'm not sure about another dimension, I'm not good with "quantum mechanics", but it's almost dense enough to approach singularity Robert; The mill/drill is from HF (of course) They have them currently on sale for $799.00. I probably have about that again in tooling.Actually I use the mill alot. Mostly  for drilling and tapping. Has a reverse switch. Cutter; The Grinder is an old Baldor of unknown vintage. It had bad bearings when I bought it. I replaced the bearings, bought a new stone. I've had it for about 20 years myself. The stand is an old becch drill press column and table.
Reply:Originally posted by cutter Jim, What brand is that old grinder?  I have one looks about like it that my dad pulled out of the dump ground at a little lake near Wichita Falls years ago.  Lower parts of the end bells are broken off but it still runs great and is the strongest grinder I own, by far. But it looks older & far rustier.
Reply:Hi Jim.Yeah keep the pic's coming.  I (we) love this kind of stuff
Reply:I want more pics. Thanks for these, nice setup.
Reply:Ok, I know it's an old thread. But I have to say that I am glad that I am not the only guy with more tools than space. I am embarassed to send in pics cuz then you guys would see what a jam packed event it really is.  Of course, it's all on wheels and I have to roll it all out every time I have a new project, either wood or metal.
Reply:Originally Posted by Joker11Ok, I know it's an old thread. But I have to say that I am glad that I am not the only guy with more tools than space. I am embarassed to send in pics cuz then you guys would see what a jam packed event it really is.  Of course, it's all on wheels and I have to roll it all out every time I have a new project, either wood or metal.
Reply:I just  gotta know...how big is the magic garage?  you have many toys oops , tools that make my mouth water.
Reply:Speaking about mouth watering...now I need a a new keyboard...I just drooled all over mine!  Really nice stuff...throw up some updated pics for the rest of us to slobber over!  I weld just to keep my snow plows ready for next Winter!
Reply:Nice, one day Ill have room for all the big boy stuff... I have all of my stuff in a 3 x 6 storage room, i live in base houseing and they love me, let me tell ya.Mike 93 YJwww.moabjeeper.com
Reply:unfortunatly it appears that fla jim is banned so i dont think we will get anymore pics for the magic garageMatt the Alaskan red neckHow can somebody with such a nice garage get banned?  Bummer, life is a kick in the @ss!I weld just to keep my snow plows ready for next Winter!
Reply:what did he do wrong ????
Reply:He probably told viperman to kiss his @ss