Very short Welding Equipment Market Survey

admin

If you will take this survey, I will post the results here:http://bit.ly/9dhBMr This survey is some welding equipment market research that would be very helpful to me. It is just one page of a few questions; it will only require a very few minutes of your time. I think everyone might find the results interesting. Thanks very much!Last edited by trscott; 02-08-2010 at 12:10 PM.Hypertherm PMX600, Miller AC/DC Stick, O/A Gas Rig -- looking for a 200A, AC/DC, TIG Squarewave Inverter, Pulse, (maybe Chinese...)
Reply:One comment on the survey. I should have been more clear in the instructions on the last question. I am most interested in your opinion of the process-mix industry-wide, not so much your particular work. But if you answered it the other way, that's okay too, Thanks to everyone who is taking this short survey!Hypertherm PMX600, Miller AC/DC Stick, O/A Gas Rig -- looking for a 200A, AC/DC, TIG Squarewave Inverter, Pulse, (maybe Chinese...)
Reply:I would also welcome feedback on the survey questions. In retrospect, I would re-write a couple of the questions, but tell me if anything is confusing, or if you think I left out something closely related.Hypertherm PMX600, Miller AC/DC Stick, O/A Gas Rig -- looking for a 200A, AC/DC, TIG Squarewave Inverter, Pulse, (maybe Chinese...)
Reply:Please posts results when survey is complete.  Thanks!A few of my toys !LinuxMintManjaroMiller Roughneck 2E Lincoln WeldPak 100HTP MTS 160 Chicago Electric 80amp Inverter   Victor O/A
Reply:That's the plan! Please ask some other folks to go take it. I really would like to get up to the maximum of 100 respondents that they allow in a free survey. Cheers!Hypertherm PMX600, Miller AC/DC Stick, O/A Gas Rig -- looking for a 200A, AC/DC, TIG Squarewave Inverter, Pulse, (maybe Chinese...)
Reply:Please pass this survey link along to any friends that are experienced welders. There are only six questions and it only takes a few minutes.So far we have 23 respondents out of a maximum of 100 that the survey site will allow for this free survey. The results are already very interesting, but the more responses we get, the more statistically meaningful the results are. I will make the summary data available to everyone here, so it's to everyone's benefit to get as many responses as we can. http://bit.ly/9dhBMr Thanks!Hypertherm PMX600, Miller AC/DC Stick, O/A Gas Rig -- looking for a 200A, AC/DC, TIG Squarewave Inverter, Pulse, (maybe Chinese...)
Reply:Any idea when results will be available? Just curious, thanks.Lincoln Powermig 300Lincoln Weldanpower 250 G9 ProLincoln LN 25Lincoln AC 225HTP Invertig 201 AC/DCHarris O/A
Reply:Originally Posted by BR549Any idea when results will be available? Just curious, thanks.
Reply:Thanks everyone for participating in this survey. I listed this at about six or eight different social media forums and twitter and we got a number of people referring us to friends, so I expect this is actually a pretty well randomized sample of the industry. As promised here is the summary data:1. I am involved in the welding equipment industry 34%, not involved in the welding equipment industry 66%.2. My age is: 17 or younger=1%, 18-24=6%, 25-34=21%, 35-44=28%, 45-54=24%, 55-64=18%, 65 or older = 2%3. I have been involved in welding for: 1 year or less=3%, 2 years=5%, 3 years=3%, 4 years=4%, 5 years=5%, 6 years=2%, 7 years=4%, 8 years=4%, 9 years= 0%, 10 years or more = 69%4. I am involved in welding as a hobby = 40%, as a profession = 16%, as both hobby and profession = 45%5. We asked for the top 5 favorite welding equipment brands. We scored each 1st favorite with a value of 5 points, each 2nd favorite with 4 points, each 3rd favorite with 3 points, each 4th favorite with 2 points and each 5th favorite with 1 point. The top ten welding equipment brands (excluding accessory brands like gloves and helmets): Miller=34,8%, Lincoln=25.6%, Hobart=9.7%, ESAB=4.95%, Hypertherm=4.3%, Victor=3.2%, HTP=1.4%, ThermalArc=1.0%, Thermal Dynamics=1.0%, Century=0.9%, 6. In my opinion, welding processes are utilized in the following percentages (either jobs or hours): Oxy/Acetylene=10.5%, Stick=25.0%, TIG=25.4%, MIG=51.1%, Plasma=7.6%, Laser=6.6%, Other=8.1%. (NOTE: where "other" was designated as flux core wire we included this as MIG)Thanks everyone! I hope others find this information interesting. We may conduct another survey at some point in the future with other questions.Last edited by trscott; 02-13-2010 at 10:20 PM.Hypertherm PMX600, Miller AC/DC Stick, O/A Gas Rig -- looking for a 200A, AC/DC, TIG Squarewave Inverter, Pulse, (maybe Chinese...)