|
|
The faux water tower tube was made by a local culvert company. 7' diameter, 8'X8' platform. Imagine setting that thing in 25 mph winds dangling on the edge of the platform. The skytrack we used was maxed out at 40'. Very sketchy for a couple hours. The roof was pretty neat. My sheetmetal guy broke it down into 12 pie pieces that interlock and it fit spot on, thank God. The mirror is polished and gun blued 1/4" strap and 1/4" angle. Copper is 1 lb per ft. and has 22.5 degree breaks all down it. The hostess stand gives you an idea for the theme of the restaurant, LOTS of 18 gauge paint grip metal. The outside fence is covered 6'-8' in that stuff, length of about 180'. Total my guys sunk around 20K screws. Lots of toys.
Reply:Very nice, I love the old antique look. That mirror ensemble is amazing! Gives me a few idear's for mine! John - fabricator extraordinaire, car nut!- bleeding Miller blue! http://www.weldfabzone.com
Reply:So much creativity!Love it.Lincoln Power Mig 210MP MIGLincoln Power Mig 350MP - MIG and Push-PullLincoln TIG 300-300Lincoln Hobby-Weld 110v Thanks JLAMESCK TIG TORCH, gas diffuser, pyrex cupThermal Dynamics Cutmaster 101My brain
Reply:Thanks for the compliments. I had to change the design on the mirror. What the architect had originally draw up was not possible to build. Also changed the copper crimping pattern. Thats atleast something you dont see every day. Thats why I enjoy this site so much. You can feed off the other maniacs ideas on here.Lots of toys. |
|
发表于 2021-9-1 00:31:15