|
|
This is for Marc..He wants to make a basket for the back of his truck that goes in the reciever..Gave me the tube and the little light to go in it..We did'nt have any "next size up" tubing for the light to fit into soooo.....We make one.. Found some thin stock and had some fun..I drilled a hole in the bottom of the tube..Extended the wires for the plug..And ran it down the inside for him..And thats all the excitement for today.....zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:As always, you sure do run some nice looking welds!
Reply:Nice looking hitch adapter. Wait! Wait...is that a Chebby emblem? Good lord...the seas are going to part! You're working on Chebby stuff! John - fabricator extraordinaire, car nut!- bleeding Miller blue! http://www.weldfabzone.com
Reply:what type of grommet did you use where the wiring enters the tubing?
Reply:Originally Posted by tortiswhat type of grommet did you use where the wiring enters the tubing?
Reply:Originally Posted by MicroZoneNice looking hitch adapter. Wait! Wait...is that a Chebby emblem? Good lord...the seas are going to part! You're working on Chebby stuff! |
|
发表于 2021-9-1 00:29:27