Entertain yourself

admin

Howdy gang.. Had some real fun today...welded some razorblades for laffs...granted they are just fused but all i have is 1 1/6 filler and thats too big..after that i had a nut job to weld...see the next post to see the "entertainment...  ...zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a  dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:Heres what you've all been waiting to see...let me see you weld your fingernail..  no...it dont hurt at all..keeps them shaking their heads......zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a  dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:Looks nice, however according to stanley tools, you blades are .024 thick.  Mine were .009 thick.  Not trying to slam, just keeping it in perspective.
Reply:It is like cutting beer cans in half and welding them back together, I mean soda cans yeah thats it soda cans .
Reply:Originally Posted by XwelderLooks nice, however according to stanley tools, you blades are .024 thick.  Mine were .009 thick.  Not trying to slam, just keeping it in perspective.
Reply:Lol  Drivesector Hobart Handler 140Hobart Handler 180Ready Welder 2Hobart Air Force 400Airco Stinger 225Of all the things I've lost, I miss my mind the most."OZZY"
Reply:Hey - I have the same cup and cap.  :whoohoo:John -  fabricator extraordinaire, car nut!-  bleeding Miller blue! http://www.weldfabzone.com
Reply:Originally Posted by TozziWeldingIt is like cutting beer cans in half and welding them back together, I mean soda cans yeah thats it soda cans .
Reply:Obviously razor blades and cans are too easy. You guys need to find something really challenging to compete over.
Reply:Whats between the cans?  Looks like theres more space than there should be.Maybe you have weird cans in brazil.  Or is there some sort of filler plate between there?DewayneDixieland WeldingMM350PLincoln 100Some torchesOther misc. tools
Reply:I was telling our Apprentice about this and he thought it couldn't be done I didn't have any stanley knike blades so I showed him with some single side razor blades hey zap knife blades or razors still not that easy to do Creative metal Creative metal Facebook
Reply:Very nice wello.  Yours and zaps are both prettier than mine.  I'll have to try just  fusing and see how it does.
Reply:Oh yeah, i did the fingernail thing.  No pain, but there was some heat building up.  That'll be a fun trick around the shop.
Reply:Originally Posted by XwelderOh yeah, i did the fingernail thing.  No pain, but there was some heat building up.  That'll be a fun trick around the shop.
Reply:Originally Posted by emerickweldingTry it on your skin....... You can feel it there
Reply:good to see you's guy'z are as nutty as i am..   ...zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a  dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:Originally Posted by XwelderOh yeah, i did the fingernail thing.  No pain, but there was some heat building up.  That'll be a fun trick around the shop.
Reply:I finally tried the razor blade welding.  Wasn't that hard.  I've been meaning to try it for a while now.here's the inside shotLast edited by littlefuzz; 06-28-2007 at 06:22 PM.DewayneDixieland WeldingMM350PLincoln 100Some torchesOther misc. tools
Reply:It was'nt that hard because we as a group told you how to do it...   Very uniform too..Cool...Next time the sparkles on the fingernail.. Nothing like a thread dug up from the grave... ...zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a  dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:Now try it with both blades lying on the table.  A corner joint is a lot easier than a butt joint.  I only tried it one time, and it went fine.  I fired up, began increasing heat/speed, and blew a hole...jammed filler into it, and went on.  It wasn't bad to do at all.  I'm sure I could do it without blowing a hole, but I was kinda trying to see how hot/fast I could go.
Reply:what sort of amps are you guys using for these razor blades?http://datingsidorsingel.com/
Reply:Originally Posted by m3pedroyou mean like this?my first try on my miller 180sdnot perfect but pretty good for a beginner.....now I have to try the razor blades...
Reply:If I can remember to do it sometime, I will.  I just forget all the time.
Reply:You guys are killing me! With fuel at an all time high, Global warming and you all wasting our natural resouces welding razor blades! Wait till Al Gore gets ahold of this . By the way keep on having fun!AWS CWI Hypertherm 850 plasmaLincoln LN-25Lincoln SAE 400Miller Big 40D28' X 36' X 14' Shop_____________________________________Tools are not the the skill but simply tools!
Reply:Soder can eh?ME!  that is a great weld.I stick welded a couple of razor blades.  David edit this pic has been posted twice. Attached ImagesLast edited by David R; 08-13-2007 at 06:33 PM.Real world weldin.  When I grow up I want to be a tig weldor.Originally Posted by David RSoder can eh?ME!  that is a great weld.I stick welded a couple of razor blades.  David
Reply:Oh hell fill it all the way up!
Reply:Looks niceIdeas Without Action are Folly
Reply:Originally Posted by EngloidIf I can remember to do it sometime, I will.  I just forget all the time.
Reply:We're quite a bunch.. Good job......zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a  dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:Nice!DavidReal world weldin.  When I grow up I want to be a tig weldor.
Reply:Cool thread worth bringing back from the dead .My best effort to date. 009", but it blew through on the very edge -Matt------------------------------------------
Reply:OK, so who can weld aluminum foil together? Havn't tried it yet, but have seen it done before. Any doubters?Good judgement comes from experience.Experience comes from bad judgement.
Reply:zap what were you doing to your finer?
Reply:Hephaestus, Wello, and enlpck that is one fine job. Box cutter blades are no big deal, but single edge ones takes some real talent.DavidReal world weldin.  When I grow up I want to be a tig weldor.
Reply:Originally Posted by XwelderOh yeah, i did the fingernail thing.  No pain, but there was some heat building up.  That'll be a fun trick around the shop.
Reply:Zapster, How did you do that thing to your finger?*insert welding gibberish here*                    Mandy
Reply:Originally Posted by ls1taZapster, How did you do that thing to your finger?
Reply:Originally Posted by Broccoli1You have to use Acetone to remove the Polish first
Reply:You couldn't wait until I had a much cheaper keyboard in front of me, could you?!
Reply:LOL, might not work on those fake acrylic nails Mandy DewayneDixieland WeldingMM350PLincoln 100Some torchesOther misc. tools