|
|
Reply:Sorry About The Big Pic I Thinki Got It
Reply:Good looking weld Mike
Reply:I assume that the weld shown is a MIG weld?It looks pretty good to me. What machine are you using?Lincoln?
Reply:Nice looking welds there, Ironmike! You've done this more than once??-MondoMember, AWSLincoln ProMIG 140Lincoln AC TombstoneCraftsman Lathe 12 x 24 c1935Atlas MFC Horizontal MillCraftsman Commercial Lathe 12 x 36 c1970- - - I'll just keep on keepin' on.
Reply:well this weld was done on a miller 250 cv-ac/dc with a miller spoolgun 4043wier. i also have a miller350 cv-ac/dc and lincoln 205invet tig .
Reply:It takes good control to keep from undercutting the top of the plate, and at the same time getting so close to the top. I can't do aluminum, only steel, and I have a hard time with keeping a lap weld that even. Nice."Any day above ground is a good day"http://www.farmersamm.com/
Reply:Oooooooh! Very nice, what did you clean it with?City of L.A. Structural; Manual & Semi-Automatic;"Surely there is a mine for silver, and a place where gold is refined. Iron is taken from the earth, and copper is smelted from ore."Job 28:1,2Lincoln, Miller, Victor & ISV BibleDanny
Reply:Originally Posted by farmersammIt takes good control to keep from undercutting the top of the plate, and at the same time getting so close to the top. I can't do aluminum, only steel, and I have a hard time with keeping a lap weld that even. Nice.
Reply:Nice work!!
Reply:purdy Bill BerryKeith Berry & Son Ltd.machine work, and weldingBear River Vollunteer FD |
|
发表于 2021-9-1 00:15:12