|
|
I am going to buy a clark 131E stick welder. any probelms with clark welders?here's a link http://store.weldingdepot.com/cgi/we...ot/WE6519.html
Reply:Nothing, bought many of them, for resale. JohnSMAW,GMAW,FCAW,GTAW,SAW,PAC/PAW/OFCand Shielding Gases. There all here. :
Reply:I don't know much about them, but a few things to watch would be that the 131 requires (recommends) a 25 amp breaker, which isn't going to be found on many home outlets. Of course at lower amperage settings that might not be as much of an issue, depending on what you're going to with this welder. I am impressed with the 30% duty cycle at maximum (130) amps - that's pretty good in a 110v welder. The only other remotely intelligent piece of advice I could give you is to check out this on ebay:http://cgi.ebay.com/ws/eBayISAPI.dll..._promot_widgetI haven't bought from this guy, but he has a 100% feedback rating - very impressive in a power seller. Anyway, hope this helps in some way.
Reply:Just bought one for 74.95. that is a good price. JohnSMAW,GMAW,FCAW,GTAW,SAW,PAC/PAW/OFCand Shielding Gases. There all here. : |
|
发表于 2021-9-1 00:05:37