stainless but weld no filler 14 gauge at 80 amps

admin

havent been doing much lately so I grabbed a few coupons and melted them together next I need to get may hands on 16 guage tube.  hit me what you think. this is 14 gauge done at 80 amps with no filler check both sides. Attached Images
Reply:I see you have been to the Miller site.......Tim Beeker.
Reply:Try a lap using some of the base as filler.   Looks pretty good, needs less heat.   Do it again!DavidReal world weldin.  When I grow up I want to be a tig weldor.
Reply:i have more so going to do the laps, i have been to the miller site along rig weider, and a few others
Reply:Originally Posted by Ron Padillai have more so going to do the laps, i have been to the miller site along rig weider, and a few others
Reply:the one in the photo is daily spanish for dummies, the tig book is out in the garage, I read anything I can get my hands on
Reply:Never used a tig torch but I could help you out with your Spanish... LOL.That fusion weld looks good to me. As soon as I get a bottle of pure argon I will give TIG a try (already have everything else).Mikel
Reply:Thanks for the offer to help with spanish, if you wanted to you could pick up 3 one way tickets to your location I could help you tig and you could help me with spanish just let me know when to get ready.