Request advice re: small style tig torch

admin

I have a miller diversion 165, and I would like to get a small style tig torch ( t-9? ). Will most any brand work on my machine? I would love suggestions / advice from the old-bys ( is that a word? )... Thanks, nooby-but-hooked!
Reply:You can swap out the 17 series head for a 9 series head with minimal issues. Check out the vid at about 1:30 or so. Keep in mind you'll have to get new collets, collet holders and cups as well as the torch head, since the 9 series uses different parts than your 17 does.[ame]http://www.youtube.com/watch?v=De7xfyhf1Ak&list=PL20D4A92F86786975&index=  10&feature=plpp_video[/ame].No government ever voluntarily reduces itself in size. Government programs, once launched, never disappear. Actually, a government bureau is the nearest thing to eternal life we'll ever see on this earth! Ronald Reagan
Reply:Thanks for that! Would any brand work? Are they all interchangeable?
Reply:You could use a CK-100 or CK-130 as well as the Weldcraft series 9 torches. They should all interchange with your cable I believe. I don't see the torch heads listed individually, but I'm sure you can get them if you call.http://www.arc-zone.com/index.php?ma...ath=13_728_907.No government ever voluntarily reduces itself in size. Government programs, once launched, never disappear. Actually, a government bureau is the nearest thing to eternal life we'll ever see on this earth! Ronald Reagan
Reply:Thanks dsw, you rock!