A little over built project

admin

I'm more of a supervisor on this job but we didn't have any steel fabricators working for us so I got to build it.I was so busy cutting out the pieces that I for got to take pics as I went.I did all this with a steel cutting saw(torch was out of oxy)6" tube 3/8" thick hardest part was cutting the birds mouth where the angled part sits on the cross pieces.We do have a pretty decent weldor
Reply:Alittle overbuilt???!!!!!!  Ya think!!!!http://jackalopefab.com/MM210Synchrowave 200DXMiller XMT350 w/60series feederMiller Bobcat 250 with SGA 100 and spoolgunHTP PlasmaFull Machine shop with everything
Reply:Originally Posted by jackalopeAlittle overbuilt???!!!!!!  Ya think!!!!
Reply:Awe $hit man!!!! Now I really hate you! Why even bother posting your location. "Paradise" would just about sum it up! Must be rough with the palm trees and beaches and all...please!!!http://jackalopefab.com/MM210Synchrowave 200DXMiller XMT350 w/60series feederMiller Bobcat 250 with SGA 100 and spoolgunHTP PlasmaFull Machine shop with everything
Reply:Here's the site when we took it overAnd now
Reply:Man................I can picture myself there now with a cocktail.....................................http://jackalopefab.com/MM210Synchrowave 200DXMiller XMT350 w/60series feederMiller Bobcat 250 with SGA 100 and spoolgunHTP PlasmaFull Machine shop with everything
Reply:Are you hiring???????  LOL.  I can " force " my self to move their.I am tired of Ketchup, I want the Gravy...
Reply:Almost doneGuy made this waterfall with plaster
Reply:Wow, beautiful work!  What a transformation!MM350P/Python/Q300MM175/Q300DialarcHFHTP MIG200PowCon300SMHypertherm380ThermalArc185Purox oaF350CrewCab4x4LoadNGo utilitybedBobcat250XMT304/Optima/SpoolmaticSuitcase12RC/Q300Suitcase8RC/Q400Passport/Q300Smith op
Reply:Originally Posted by IamVinceI'm more of a supervisor on this job but we didn't have any steel fabricators working for us so I got to build it.I was so busy cutting out the pieces that I for got to take pics as I went.I did all this with a steel cutting saw(torch was out of oxy)6" tube 3/8" thick hardest part was cutting the birds mouth where the angled part sits on the cross pieces.We do have a pretty decent weldor
Reply:i'm sure when he welded the angles to the post he burnt it in there good...........