bumper

admin

sheet metal bumper i built at work a while back its not my design it a guy at work that did this one i just built it...its for a 04WJStrive For Perfection
Reply:WOW! How many hrs of work was that?Just another clown trying to be cool
Reply:Wow. Nice design and good looking welds. Good job.
Reply:I can do one in 8.5 hrsStrive For Perfection
Reply:I'm just going to post some other project in this thread haven't been on here in awhile so it would be easier not to start a ton of new threadsStrive For Perfection
Reply:bead roller projectStrive For Perfection
Reply:hear is my first project with it.. Sand car revamp ARRIVAL My workStrive For Perfection
Reply:Strive For Perfection
Reply:race rhinoStrive For Perfection
Reply:you the man!
Reply:Are you a robot? Those welds look great.Dave ReberWadsworth Ohio
Reply:nice work how thick is the metal youused for the bumper
Reply:Originally Posted by ed macnice work how thick is the metal youused for the bumper
Reply:You do really nice work!Tim Beeker.
Reply:Some nice looking work, BBB.  Impressive.Lincoln AC225 & MigPak 140, Lincoln Magnum SpoolGun, Miller Spectrum 375-X Plasma, Syncrowave 200 TIG, Millermatic 252 MIG, Miller Digital Elite, General 7x12" horiz/vert bandsaw, 3' box/pan brake, 20 ton press, milling machine, 12x28 lathe, etc.
Reply:Thanks for putting these up.  It's a nice look into a whole different world.  Automotive stuff never fails to astound me at the precision of the work.  Makes me feel like a hacker with all thumbs"Any day above ground is a good day"http://www.farmersamm.com/
Reply:Thanks!! GuysStrive For Perfection
Reply:woah! those are amazing
Reply:How about a little more detail as to how you built the bumper?  It looks great with very sharp, straight lines and a bit more insight would be very appreciated.Miller 185Lincoln Weldanpower 225Lincoln 225 buzz boxCheap-o C&H 110v (my first welder)
Reply:VERY nice work!
Reply:Real nice bead roller, too.  1/4" frame?  Will you only roll lighter (<18 g) stuff?
Reply:I'd hope "Built x Brooks" is your company name, too...  It should be.
Reply:Brooks, how about some info on how you formed those panels.  What tool did you use, and do you have any pics of a panel in progress?Only two defining forces have ever offered to die for you, Jesus Christ and the American G. I. One died for your soul, the other for your freedom.
Reply:Originally Posted by 7bicksHow about a little more detail as to how you built the bumper?  It looks great with very sharp, straight lines and a bit more insight would be very appreciated.
Reply:Originally Posted by JMWReal nice bead roller, too.  1/4" frame?  Will you only roll lighter (<18 g) stuff?Originally Posted by PoisonPancakesBrooks, how about some info on how you formed those panels.  What tool did you use, and do you have any pics of a panel in progress?
Reply:Is that bumper MIG welded?
Reply:Originally Posted by pyroracing85Is that bumper MIG welded?