Replacement gauge for regulator?

admin

I had an 'ooops' today in the garage and accidentily smashed the gauge on my newish regulator.  I assume I can replace the gauge, right?  If so, can someone link me to a good priced replacement?  I've never seen replacements for sale but I got to imagine I'm not the first person to break one."There are two types of people in America - those who try to classify everyone into two types and those who don't."
Reply:Any welding supplier should sell them otherwise cyberweld or weldfabulous should sell themMillermatic 252millermatic 175miller 300 Thunderboltlincoln ranger 250smith torcheslots of bfh'sIf it dont fit get a bigger hammer
Reply:So far, I haven't been able to find a gauge that threaded from the backside.  I'll keep looking though.I might give Weldmark a call tomorrow and get a part number and price on a replacement."There are two types of people in America - those who try to classify everyone into two types and those who don't."
Reply:mcmaster has all kinds of pressure gaugeshttp://www.mcmaster.com/#atmospheric...gauges/=gd869aDynasty200DX w/coolmate1MM210MM VintageESAB miniarc161ltsLincoln AC225Victor O/A, Smith AW1ACutmaster 81IR 2475N7.5FPRage3Jancy USA1019" SBAEAD-200LE
Reply:http://www.regulatortorchrepair.com/...eel-case-gaugeI sell these and other gauges online at the link above.JimOAdoctorwww.regulatortorchrepair.com
Reply:^^^ Your page isn't loading for me."There are two types of people in America - those who try to classify everyone into two types and those who don't."
Reply:Originally Posted by SuedePflowSo far, I haven't been able to find a gauge that threaded from the backside.  I'll keep looking though.I might give Weldmark a call tomorrow and get a part number and price on a replacement.
Reply:I ended up picking up a side threaded gauge from my local welding supply place.  It will do just fine.  I rarely look at that gauge anyway."There are two types of people in America - those who try to classify everyone into two types and those who don't."