Welding pic's

admin

Been reading and checking out pic's for a while now and thought i say hi Picked up a Lincoln Migpak 180 a little while back from Canadian Tire and thought i'd give it a go, ended up being a little harder than i thought Couple old pic's, this is with 25 wire and gas.Last edited by LanceM; 12-29-2008 at 09:50 PM.
Reply:Not bad at allkeep it up weld it like you own it
Reply:Thanks man
Reply:Not lookin' too bad, keep practicing and watch the puddle as you go.If you don't want to stand behind our Troops, feel free to stand in front of them.
Reply:Couple more pic's As you can tell the body's shot and i've been patching it for years but it's only a toy so it didn't matter to much. But i got some new fender flairs to cover up the tires and there wasn't to much to attach to
Reply:The other sideWith some paint
Reply:Looks like a fun toy, great project to practice the skills on.If you don't want to stand behind our Troops, feel free to stand in front of them.
Reply:Does that snorkel say somethin' about your drivin' habits???Last edited by farmersamm; 12-30-2008 at 12:31 AM.Reason: Spelling"Any day above ground is a good day"http://www.farmersamm.com/
Reply:Couple pic's of an engine dolly i just finished
Reply:
Reply:Are the Rockwells going in?
Reply:Ya i was going to stick them under the jeep but i really havn't had the time to do the 4x4 thing these days.  But hopfully this winter i'll get it started again, you've got a zuk right?
Reply:Not bad! Nice work and nice jeep!Ya gotta spend money to make money!
Reply:Thanks,  here's a couple pic's of some jack stands i built.
Reply:Last edited by LanceM; 01-01-2009 at 03:38 PM.
Reply:Great looking stuff and fabrication there LanceM!Now all you need is to replace all the grass with some concrete and throw a roof over it.MM200 w/Spoolmatic 1Syncrowave 180SDBobcat 225G Plus - LP/NGMUTT Suitcase WirefeederWC-1S/Spoolmatic 1HF-251D-1PakMaster 100XL '68 Red Face Code #6633 projectStar Jet 21-110Save Second Base!
Reply:Thanks, here's a couple pic's of todays project
Reply:I love that air tool rack, I think I might do that myself, great idea!- If you can jump across it you can weld it!  - anonymous old boilermaker
Reply:Thanks, but i can't take credit for the idea. Found it on a different site
Reply:Nice Stuff LanceM.,I might copy it myself, even if it is second hand? Bruce The Welding ChefLincoln Weld-Pack 3200 NORWELD StickStanford Hill Farm
Reply:I'm so jealous! I wish i had 1/2 the imagination/engineering ability to come up w/ the stuff you have!!! GREAT job!
Reply:When I grow up.............Bruce The Welding ChefLincoln Weld-Pack 3200 NORWELD StickStanford Hill Farm
Reply:when i win the lottery...nice work, you've been busy
Reply:Thanks guys, ran out of gas today so can't keep playing until i can save up my pennies for some more But found this coat hanger idea and thought i could use one, but added my own personal touch .Got one of those Canadian Tire Lincoln welders .
Reply:I Like the coat rack. And the Jeep. What year?It's a 85 but the grill is about the only thing thats made it this far, everything else has been replaced by older better stuff  Engine from an 70 JavelinTranny from a 77 CJT-Case from a 80 ScoutAxles from a 79 ScoutFrame from a 83 And so on .Got one of those Canadian Tire Lincoln welders .
Reply:i like the weld fotos but get some gloves you gonna get hurt with that potholder.,.also some neat ideas..
Reply:Sweet. Thanks For the info.
Reply:Originally Posted by weldbeadi like the weld fotos but get some gloves you gonna get hurt with that potholder.,.also some neat ideas..
Reply:good ideas!Hobart Handler 140Lincoln AC/DC Arc WelderRand 100amp Tig/Arc WelderHobart XVS Hood customized by Water Magic ImagingSoutheastern Illinois College