|
|
I was getting the machine setup today testing out the pulse setting on a piece of 18ga scrap. Lap weld both sides, and as im looking at it I notice the color on the backside shows the individual pulses. Ive seen this in purged full pen. welds before, but never in just the color.Plus I got a new camera, and I had to try it out.Settings were 50 amps on the dial, 3/32 red, and I forget the pulse. No filler, 18ga SS Attached ImagesHave we all gone mad?
Reply:serious dimes...... |
|
发表于 2021-8-31 23:47:05