|
|
I'm trying to weld a small 1x4x0.125 bar of Aluminum to a 1x1x16gauge square tube at an odd angle..... can't get it to arc keeps on blowing out!, any suggestions for a small clamp to ground it .
Reply:Originally Posted by AluminumWelderI'm trying to weld a small 1x4x0.125 bar of Aluminum to a 1x1x16gauge square tube at an odd angle..... can't get it to arc keeps on blowing out!, any suggestions for a small clamp to ground it . |
|
发表于 2021-8-31 23:38:01