Patio Heater

admin

Decided to make this log burner today for a relative because he had expressed an interest in other ones I have made, Both him and his wife  have the initials JJ so I thought it might give him a buzz to personalise his log burner a little.No build photo's i'm afraid but photo's are self explanatory i think,Made from half a large 47 kilo propane bottle with 10mm thick top for a little cooking maybe.Had the whole thing grit blasted prior to coat of very high temp paint, Attached ImagesLincoln SP-170 MigHypertherm powermax 45Lorch T220 AC/DC TigButters FM 215 synergic MigKemppi 180 adaptive mig RULES ARE FOR THE OBEDIENCE OF FOOLS AND THE  GUIDANCE OF WISE MEN.
Reply:I like the look. Looking through the "Js" I bet the flames and glowing will really look cool. Thanks for sharing your pictures!
Reply:Looks good Gordon. It also looks like we are on a  par in our painting skills.
Reply:Hello Bob,               Yes the paint job was a disappointment,I only had half a rattle can left and tried to get the whole thing covered to stop flash rusting.I do prefer to brush paint them but had picked up some high temp aerosol cans that were cheap a while ago.Will give it another decent coat when I get more paint,Last edited by gordon stephenson; 05-16-2012 at 03:57 AM.Lincoln SP-170 MigHypertherm powermax 45Lorch T220 AC/DC TigButters FM 215 synergic MigKemppi 180 adaptive mig RULES ARE FOR THE OBEDIENCE OF FOOLS AND THE  GUIDANCE OF WISE MEN.