this weeks project

admin

built a table this week for a coffee shop9'x30"ADA height compliantrecycled I beam vertical columns FK USA made heim joints 5/8", DOM tubingTimkin USA made pillow block bearingsDOM main pivot shaft, machined for bearingswill bolt to the concrete floor on sightwill level the top on site and lock in place via the connecting rodsall clear powder coated (this week)new saw = new designs
Reply:for the one time leveling and installation i think you went  WAY  overboard, but it does look coolVantage 500's LN-25's, VI-400's, cobramatics, Miller migs, synch 350 LX, Powcon inverters, XMT's, 250 Ton Acurrpress 12' brake, 1/4" 10' Atlantic shear,Koikie plasma table W/ esab plasmas. marvel & hyd-mech saws, pirrana & metal muncher punches.
Reply:Pretty darn cool. I guarantee... if I was sitting at the table... I'd have my head under the table checking out the mechanism. Very visually interesting. Post a picture after it's shot clear.I think I found your missing box end wrench... behind your wicked cool new saw.
Reply:Nice job I could use on of those!! Thanx for the post
Reply:Sweet table.  It would be great with a heavy glass top so you could see through to the cool mechanical stuff underneath.Miller Dynasty 200 DXBuildPro TMA52238 (38" x 22")Miller MP-10 & Jackson Nexgen EQC20 Ton Press & Swag HD Press Brake
Reply:The underside is spectacular.....Nice work.........Precision TIG 185 and MP 210Bobcat 225NTCutmaster 42O/A tanks.... 2 Argon tanks...... 2 C25 TanksFacebook...... F2 Metal WorksETSY....... https://www.etsy.com/shop/F2MetalWorksF2MetalWorks.com....... http://www.f2metalworks.com/