|
|
I see all those tungsten questions&answers.. I must be doing something wrong but one pack of 3/32 lanthanated lasts about one year for myself...1/16 goes faster but I don't use it so much lately . I'm not a hobby welder, I do it for a living, sometimes many hours a day every day, till I get tired and get in a fight with some boss or engineer ( I choose the timing so I'm allways right )--------------------------------------------------------------www.becmotors.nlyup, I quit welding.. joined welder anonymous
Reply:I bought my Syncrowave 200 on 1-6-07. I bought a 10pk of 3/32 red and a 10pk of 3/32 green at the same time. I think I have half a piece of each left. I bought another 10pk of a different type, but haven't even tried them out yet. I wanted to get rid of my old stock first.EDIT to add.....94 hours on machine.Last edited by Boostinjdm; 02-22-2012 at 04:57 PM.My name's not Jim....
Reply:As little as possible.....zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:I run though maybe two sticks per year. Although probably more than half the welding I do is stick. Just hobby stuff and farm repairs.Dynasty200DX w/coolmate1MM210MM VintageESAB miniarc161ltsLincoln AC225Victor O/A, Smith AW1ACutmaster 81IR 2475N7.5FPRage3Jancy USA1019" SBAEAD-200LE
Reply:I am still learning... and I burn up a decent amount of tungsten. I went through a pack of 1/16" in about 2 months...
Reply:Originally Posted by kustomizingkidI am still learning... and I burn up a decent amount of tungsten. I went through a pack of 1/16" in about 2 months...
Reply:Hard to say. Typical 40hr week welding stainless all day, I will use up about 1/4 to 1/2 inch of 1/8th regrinding the point.ɹǝʌo ǝɯ lloɹ 'sıɥʇ pɐǝɹ uɐɔ noʎ ɟı |
|