Celtic Cross

admin

A quick little commission that had to be knocked out in time for Christmas. Cut from 11 ga. sheet, ground shiny with 36 grit discs, then clear coated. Tacked a piece of 1/8 316L tig rod on the back to hang it from. [If I don't see you before then, Merry Christmas!Brian LeonardAppalachian Ironworks L.L.C.434 Long Branch Rd, Marshall, NC 28753828 649 9966828 702 [email protected]
Reply:Very cool!I hate being bi-polar it's awsomeMy Heroes Have Always Been Cowboys
Reply:hey u know Bill Brown , anvil arts  up by Linville ?
Reply:You always do really nice work there Brian. This is no exception.  What did you use to cut this out? The edges and corners look really nice and crisp..No government ever voluntarily reduces itself in size. Government programs, once launched, never disappear. Actually, a government bureau is the nearest thing to eternal life we'll ever see on this earth! Ronald Reagan
Reply:Originally Posted by yankeewelderhey u know Bill Brown , anvil arts  up by Linville ?
Reply:Nice Job Brian, But you knew that already Excellent!!, How are you thinking of finishing it??
Reply:Nice job Layout on stuff like that drives me nuts. Seems to take me awhile to wrap my mind around it and then I usually mess up the first one anyway. Is that one tiny little burn through on the bottom right corner? or just the pic?If you cant fix it with a hammer, it must be an electrical problem."Boy, everyone starts with a full bag of luck and an empty bag of experience. The trick is to fill the bag of experience before the bag of luck is empty."-Grandad circa 1990ish
Reply:Do you have a pic of the final product... polished or sanded?DannyMy SiteJust worrying 'bout what I can't get to today.
Reply:Originally Posted by Gerry1964Nice Job Brian, But you knew that already Excellent!!, How are you thinking of finishing it??
Reply:Very cool!(Retired) Professional firefighter, amateur everything else I try to do...Oh yeah:  Go Big Red!   (You know: one of the 12 members of the Big 10 cuz we left the 10 members of the Big 12...)
Reply:Nice work. How do you get clarification or agree on what the finish product will look like?  Not just this but any product that requires shining or polishing.
Reply:Originally Posted by tapwelderNice work. How do you get clarification or agree on what the finish product will look like?  Not just this but any product that requires shining or polishing.
Reply:It is beautiful work! What about the HAZ marks where you tacked it? Do those stay that way? I'm thinking I would hit the whole thing with a blue roloc.Miller diversion 165Miller mig 211Hypertherm pm 30Milwaukee 6230 14 inch chop sawMd 45 mag drill (RIP; fell on its head)New MD 45! Thanks to the esposa!Finally got an O/A setup
Reply:very nice work
Reply:nice cross  i used to live in spruce pine  love the area- if u get a chance check out anvil arts think u will like his work  , bill teaches at penland school of arts
Reply:Originally Posted by yankeeweldernice cross  i used to live in spruce pine  love the area- if u get a chance check out anvil arts think u will like his work  , bill teaches at penland school of arts
Reply:Very nice, and cleanJobSmart MIG125Lincoln AC225-SLincoln Pro-Mig 175Dewalt GrindersRidgid ChopsawIR Garage Mate CompressorAny thing worth doing, is worth doing right.