Info On Airco Model 3-dcpa-224-a

admin

HELLO, FIRST GREAT SITE WITH LOTS OF INFO!! PICKED UP THIS WELDER WITH WIRE FEED, NEED TO FIND A MANUAL FOR IT, ID PLATE HAS AIRCO 300 AMPERE DC, AIRMATIC PULSED ARC, MODEL 3-DCPA-224-A, ANY INFO ON THESE WOULD BE GREAT , GOING TO TRY PUTTING PICS BELOW, THANKS Attached ImagesLast edited by dmh434; 10-03-2006 at 12:31 PM.
Reply:I have a pa-3a airco pulse welder. When you get yours hooked up & ready to weld if you give me wire dia. & no. i can probably get you in the ballpark on settings, pps background & voltage.