DIY Sand Blaster

admin

Anyone have or know of some plans for a Sand/Abrasive blaster. Seen pics of one made from larger propane tanks. Have good idea on the piping but hoping for a more detailed drawing. Especially for the filler plug on top, typically the top is caught off and inverted. Got a larger(60# I think) old tank just itching to be converted . ThanksLatest Toys Miller 180 Mig and Elite Mask!!Wright Welder 225ACShop OutFitters 20/20 Bending SystemHypertherm 380 Plasma30 Years of Sparking (Electrical & Welding)
Reply:i know there have been several topics on this subject here, have you searched?
Reply:Yep, already searched here but not really much on details. Some nice looking designs.Latest Toys Miller 180 Mig and Elite Mask!!Wright Welder 225ACShop OutFitters 20/20 Bending SystemHypertherm 380 Plasma30 Years of Sparking (Electrical & Welding)
Reply:Here is a pic of mine shows filler basic but it works great.Filler is just a black iron coupler whith a plug ,I welded a ring on the plug to create a sealing flange.http://i36.photobucket.com/albums/e5...y/HPIM0287.jpgLast edited by kamhillbilly; 06-06-2007 at 07:09 AM.Miller Big 40Lincoln SP 125Millermatic 180Century 20/50 plasmaHe who dieswith the most toys ...Still DiesThere is room for all Gods creatures .......... Right next to my mashed potatoes
Reply:http://www.vintageprojects.com/metal...andBlaster.pdfHere is something I just found that might help a bit.Smithboy...if it ain't broke, you ain't tryin'.
Reply:Thanks smithboy, thats more what i was looking for. Details on the top plug for filling. Looks like the inner cone must be put in before it's welded closed.  Have to remember that LOLLatest Toys Miller 180 Mig and Elite Mask!!Wright Welder 225ACShop OutFitters 20/20 Bending SystemHypertherm 380 Plasma30 Years of Sparking (Electrical & Welding)