new (to me) flux core Tig rod

admin

I just got spam with this new WARod thing...http://www.welding-alloys.com/produc...-tig-rods.htmlI have a full stock of SS filler so I won't buy anything new for a while.Looking for some real world feedback about this fc filler.I can see how my "purge" smoke breaks will be a thing of the past ....--------------------------------------------------------------www.becmotors.nlyup, I quit welding.. joined welder anonymous
Reply:I have read about this before, but this is the first time I have seen pics/video of it. Any idea where I could buy some (If it doesn't cost too much)?Airco Ac/Dc 300 HeliwelderMillerMatic 200 (stolen)Miller Maxstar 150STLMiller AEAD200LE (welding and generating power) Hobart MIG
Reply:Flux core for a TIG?I will PASS....zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a  dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:Originally Posted by zapsterFlux core for a TIG?I will PASS.
Reply:Originally Posted by KelvinWhat, you're too good for slag?
Reply:Originally Posted by zapsterI never stated that but why cause more problems when they can be avoided altogether?PASS....zap!
Reply:Originally Posted by SquirmyPugSometimes when you aren't in the shop purging isn't easy/practical to do. Seems like it would be nice to have.
Reply:Originally Posted by zapsterFlux core for a TIG?I will PASS....zap!
Reply:OK I have a legit question that hopefully someone can explaine..But I doubt it.Lets see..Whenever I forget to turn on the gas when I hit the pedal the tungsten just goes POOF!!!!!!OK now.What is going to stop that from happening??And don't say the fluxcore.That is incorrect....zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a  dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:Originally Posted by zapsterOK I have a legit question that hopefully someone can explaine..But I doubt it.Lets see..Whenever I forget to turn on the gas when I hit the pedal the tungsten just goes POOF!!!!!!OK now.What is going to stop that from happening??And don't say the fluxcore.That is incorrect....zap!
Reply:Originally Posted by zapsterOK I have a legit question that hopefully someone can explaine..But I doubt it.Lets see..Whenever I forget to turn on the gas when I hit the pedal the tungsten just goes POOF!!!!!!OK now.What is going to stop that from happening??And don't say the fluxcore.That is incorrect....zap!
Reply:Here is the video.Airco Ac/Dc 300 HeliwelderMillerMatic 200 (stolen)Miller Maxstar 150STLMiller AEAD200LE (welding and generating power) Hobart MIG
Reply:Damn..Over my head and under my chin at the same time.....zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a  dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:Very cool. They do make it in 1.6mm.Weld like a "WELDOR", not a wel-"DERR" MillerDynasty700DX,Dynasty350DX4ea,Dynasty200DX,Li  ncolnSW200-2ea.,MillerMatic350P,MillerMatic200w/spoolgun,MKCobraMig260,Lincoln SP-170T,PlasmaCam/Hypertherm1250,HFProTig2ea,MigMax1ea.
Reply:I just watched the video, seams legit! Gotta admit the girl sounded sexxy!  I hate being bi-polar it's awsomeMy Heroes Have Always Been Cowboys
Reply:I'm a boilermaker and typically most elements and panels that are stainless will have carbon safe ends on the ends so that carbon only welds will have to be made in the field. It is a pain to purge stainless welds on a boiler. Purge paper and football needles if you will.This flux core wire is idea in situations like this and it's the only time I've ever seen it used.
Reply:Why no close up photos of the backside of the weld?  Somebody please post photos if you try it.Dynasty 300DXSmith He/Ar gas mixerMM350PHobart Handler 120Smith LW7, MW5, AW1A
Reply:Originally Posted by shovelonVery cool. They do make it in 1.6mm.