|
|
Hi I'm looking for a pedal to control the juice on my TIG machine, which is a Hobart TIGMate. It came with a Miller fingertip controller, though the guy I got it from put that on there. I don't think it came that way. Anyway, I'm looking to sell the hand controller and buy a foot controller. Let me know what you have! Thanks,-Mike
Reply:Hey Mike, I would be willing to buy the hand control from you. Is it the 14 pin type???Miller blue star 2eLincoln 175
Reply:Just want to mention, if the control has the correct potentiometer for your power supply, it is not that difficult to change out the connector. Generally there are two pins for the contactor (arc on/off) and three for the potentiometer.
Reply:Fear, sorry it's taken me a while to get back on here. I actually am thinking about just making a footpedal out of the parts I have, since the thumb thing 'works', but I don't like how it does it. I was talking to my Dad last night and he gave me some good, yet rather amusing, ideas. It'll be a lot cheaper that way, too.
Reply:SCS sells good foot controls at about $150. summer is here, plant a tree for mother earth. if you dont have time or space, sponcer some one else to plant one for you.feel free to shoot me a PM or e-mail me at [email][email protected] i got lots of time. |
|
发表于 2021-8-31 22:52:35