if you need a cover i can make it.

admin

if you can not find a cover for your welder, or don't like the ones that are offered. shoot me an e-mail and I'll work with you to make the cover you want for your welder. the factory cover for the dyn200DX from miller makes you disconnect every thing just to cover the welder. not my cover for the dyn200 it allows you to keep the welder hooked up ready to weld wile covered. its a simple user friendly design that every one loves. i can do the same for your welder. here is my dyn200 cover Attached Images summer is here, plant a tree for mother earth. if you dont have time or space, sponcer some one else to plant one for you.feel free to shoot me a PM or e-mail me at [email][email protected] i got lots of time.
Reply:How much for a cover like that?  I weld just to keep my snow plows ready for next Winter!
Reply:the Dynasty 200 cover is $40 shipping included, shipping insurance is optional at $1.50thanks James you can e-mail me direct at [email protected] summer is here, plant a tree for mother earth. if you dont have time or space, sponcer some one else to plant one for you.feel free to shoot me a PM or e-mail me at [email][email protected] i got lots of time.
Reply:just wanted you to know we also cover the bigger welders like the MM210 or 251 pictured here. we have also started to make gage and cable covers. i do not always get e-mail notification from this site so shoot me one direct if i don't get back to you. my e-mail in my signature is good. i have a 100% satisfaction rating and will happily work with you to get your stuff covered if i don't have a pattern for what you want covered.all our covers are made in the U.S.A. with the highest standards of quality.thanks for taking the time to look. Attached Images summer is here, plant a tree for mother earth. if you dont have time or space, sponcer some one else to plant one for you.feel free to shoot me a PM or e-mail me at [email][email protected] i got lots of time.
Reply:here is a pic of the cable cover with my TA-185 i also have a gage cover in the pic but its coverd with a cartoon embroidery and a bit hard to see in the back right. the eagle is available and we also got the military emblems we wanted so we can put them on the covers now also.thanks James & Marie Attached Images summer is here, plant a tree for mother earth. if you dont have time or space, sponcer some one else to plant one for you.feel free to shoot me a PM or e-mail me at [email][email protected] i got lots of time.
Reply:How about the red ones?  I could use one for my ranger 250. Custom embroidery? waterproof?DewayneDixieland WeldingMM350PLincoln 100Some torchesOther misc. tools
Reply:i can make them for anything, but the fabric we use is not water proof as we started out with the intention of making a better cover for the shop. i did make a cover for a bobcat and he just sprayed it with camp dry i think he said. it came out real nice and he was verry happy with it. we went with a breathable fabric as it was what was wanted, the companys make water proof ones but most dont fit well and people wanted a cover that would breath. we do custom embroidery, we have several designs and can do lettering on site but if you want your company logo done we have to get it digitised out of house.FWIW; we have done covers for laths, tool boxes, drill presses and even grinders. if you are willing to work with us we are willing to cover about anything. i'll look around and see if i can find pic's of the cover we made for the bobcat, or the link to it in the hobart forem so you can also get the new owners own opinion of it. we have never had an unhappy customer. summer is here, plant a tree for mother earth. if you dont have time or space, sponcer some one else to plant one for you.feel free to shoot me a PM or e-mail me at [email][email protected] i got lots of time.
Reply:I don't have a Logo but that would be something nice to add.  I'll try to come up with one and get back to you.  I like the others you have pics of.DewayneDixieland WeldingMM350PLincoln 100Some torchesOther misc. tools
Reply:i found a place localy that said they could do my digitizing, i'm going to give them a try on a miller logo and see how well they do. befor them i sent them to canada to get digitized, thats where the smoking joe came from. they do good work but are expensive. the local place is much more reasonable in price.so i hope there work is up to snuff. summer is here, plant a tree for mother earth. if you dont have time or space, sponcer some one else to plant one for you.feel free to shoot me a PM or e-mail me at [email][email protected] i got lots of time.
Reply:hi there was wondering about the cable cover. whats the material and how much is it? i think i have a 25' torch and it is also water cooledthanksbear
Reply:the cable cover is made of a car hartt fabric. its sturdy and treated to be flame retardant just like the rest of our covers. we sell it by the ft. so you can get it to fit your cable size, it is $1.60 a ft. and we offer free shipping. you can find it in our e-bay store. i think there is a link to it in my signiture line but i will check to insure it is working. i listed it as a multiple item sail so if you want 25ft purchas 25.we also just added paypal and credit card payment options. and i'm hopeing to add a spare cable case tomarow that will alow you to store your extra torch and cable if you have one. it is not on the site as i am just now making the first one (for me  ) so as soon as its finished and i can take a pic. i will add it to the site. summer is here, plant a tree for mother earth. if you dont have time or space, sponcer some one else to plant one for you.feel free to shoot me a PM or e-mail me at [email][email protected] i got lots of time.
Reply:price for say a 39"h x 32"w x 36"l for roll around tool box I'll get the right #'s for you tomorrowcan you get me an est. on these #'sthank you
Reply:$75 is to $100 depending on the design would be a ruff guess, do you intend to add a design?? and do you want it in blue or thicker black?? summer is here, plant a tree for mother earth. if you dont have time or space, sponcer some one else to plant one for you.feel free to shoot me a PM or e-mail me at [email][email protected] i got lots of time.
Reply:i supose i should put these in here also. Attached Images summer is here, plant a tree for mother earth. if you dont have time or space, sponcer some one else to plant one for you.feel free to shoot me a PM or e-mail me at [email][email protected] i got lots of time.
Reply:also here is a pic of the dyn200 in cammo, we may only have the cammo available for a short time as we need to find a good scorse for the fabric. Attached Images summer is here, plant a tree for mother earth. if you dont have time or space, sponcer some one else to plant one for you.feel free to shoot me a PM or e-mail me at [email][email protected] i got lots of time.
Reply:could you guys make a cover for my miller 175?? And do you guys make cover, bag for welding helmets??? if so how much man would love to get the camo one for the welder. thanks a lot sean
Reply:Originally Posted by fun4now.$75 is to $100 depending on the design would be a ruff guess, do you intend to add a design?? and do you want it in blue or thicker black??
Reply:Weldingyota92the MM175 cover is $45 in cammo with MM175 on the front, the MM175 would be in black unless you would like it in another color if so just tell me what color you want the MM175 in and we will do it in the color of your choice, no biggy. shipping is $5.00 with dilivery confermation included in that so you will get tracking #'s when it shipps. also available is shipping insurance it is $1.50 and optional to you.the cammo realy is verry cool looking stuff, i am going to do my MM135 and tank and gage cover in it. except i put the POW*MIA on the gage cover and the U.S.Army on my Tanks cover and  still not shore what i will put on the MM135 cover yet probly the miller logo in black and blue as it looked realy cool on my torch bag, we shall see i'll have to pop a pic when i finish mine. who knows i might just put taz back on it,lol although a flag would be cool also. just too many options realy. the wife is doing my tank cover for it now. summer is here, plant a tree for mother earth. if you dont have time or space, sponcer some one else to plant one for you.feel free to shoot me a PM or e-mail me at [email][email protected] i got lots of time.
Reply:tompit9i also have a green verry similer to the tillman green only a little darker and a cammo as seen above. i do not have a tee pee design, i could look for one but it would likely be between $10 & $15 to get the design then $15 to sew it on, or if you have a teepee pic you want i could get it turned into a stich design and us it but that would be between $20 &  $30 depending on how complex the design is.you could also do a serch for embroidery designs and there are several sites that you could find a teepee design from if you wanted to find one you like. most sites will sell single designs. as long as its a 4"X4" design the wife can sew it on. it all depends on how much you want to spend, we can do our own lettering so its only like $8.00 for up to 15 letters or numbers to be sewn on. summer is here, plant a tree for mother earth. if you dont have time or space, sponcer some one else to plant one for you.feel free to shoot me a PM or e-mail me at [email][email protected] i got lots of time.
Reply:just so you know the cammo, green, and black are all a limited suply, the blue is the only fabric we have a continuous suply of so i dont know how long we will have the other options. summer is here, plant a tree for mother earth. if you dont have time or space, sponcer some one else to plant one for you.feel free to shoot me a PM or e-mail me at [email][email protected] i got lots of time.
Reply:need one for my power mig 215 and one for my esab heliarc 252!!would like to have access to control pannel without removing the cover(flap with velcro)give me some price, i really need them!!thanks
Reply:how much would you charge for a camo cover with a miller emblem on it for a miller 210, Thanks, Nick
Reply:flamephilsorry i mist your post.i dont have patterns for thouse welders so i would need pictures and mesherments to get them made for ya but we can do it, please e-mail me directly. thankstrailgoosethe MM210 cover is $80 with MM210 on the front, if yoiu want the miller logo and name on the side its $15 for one side and $8 for the other side if you want it on both. shipping is $5 with dilivery conformation. insurance is optional at $2.50as you want it in cammo i'm noyt shour what collor you will want it in but here are a few idea's. feel free to chose any collors you want. we can embroider them any way you want., shoot me an e-mail.thanksJames Attached Images summer is here, plant a tree for mother earth. if you dont have time or space, sponcer some one else to plant one for you.feel free to shoot me a PM or e-mail me at [email][email protected] i got lots of time.
Reply:how much for a ranger 250?????
Reply:not shore what the ranger 250 is, is it an engen driven outside welder ??about what is the size of it?? W,H,L? summer is here, plant a tree for mother earth. if you dont have time or space, sponcer some one else to plant one for you.feel free to shoot me a PM or e-mail me at [email][email protected] i got lots of time.