Inexpensive Plasma Cutter

admin

Northern Tool 375 Plasma Cutter 40 amp for $630.  3-year warranty.  Their prices for Trafimet S45 torch consumables (used by some HF and HTP cutters) look low too.TeddCoHTP Microcut 400 & Invertig 160DC  Smith Dual Guard MD-510 OA Rig  Lincoln SP135+  Hobart Stickmate LX 235/160
Reply:When you say inexpensive plasma cutters!! Beware.You may want to address a question in the Other Manufacturers forum about the product 1st. You need to consider many things besides the initial cost of the unit. Personal, Hobby, or Business use!  etc etcCo-Own CNC shop:Miller :1251 plasma cutter, MaxStar 700 TIG/Stick, & XMT 456 Multiprocess Welder.&  2 Hypertherm HPR260's Plasma CutterSorry I had a bad stroke but now I am back.
Reply:Teddco,If you go cheap just be sure their customer support is good. You may not need it but if you do then it can make a huge difference. I guess that can go for anything purchased online and shipped.Good Luck.MillerMatic 212, Lincoln Precision TIG 225, Hypertherm 45XP
Reply:I stated two facts about cost and length of warranty, and made one observation about consumable prices.  No endorsement made or inferred.TeddCoHTP Microcut 400 & Invertig 160DC  Smith Dual Guard MD-510 OA Rig  Lincoln SP135+  Hobart Stickmate LX 235/160
Reply:Originally Posted by TeddcoI stated two facts about cost and length of warranty, and made one observation about consumable prices.  No endorsement made or inferred.