Painting SA200

admin

A couple questions on painting welder, where do you order the gray and will it hurt anything to get paint in the vent holes at the barrel? And I need stichers,oh what about sanding will it hurt to get dust in barrel?1990 SA 200Miller 225  Rip Miller302Miller 135Lincoln 200 MigHypertherm 600 PlasmaPlasma Cam Cutting TableMikita Cold SawJL Welding Tx . com
Reply:I bought my paint at Wally World. Lots of guys like better paint than I do. I painted an old Harley with Black Epoxy Krylon several years ago and everyone said I was nuts. Eight years later you can still see yourself in it good enough to comb your hair (if I had any left). AWS Forum and this one too have different paint recommendations if you'll search. You can just blow the dust out of the vents and barrel, I wouldn't use a lot of pressure tho. I got my sticker (Decals) at the Decal Shoppe, LLC. 16772 W. Bell Rd.,Surprise, AZ 85374. 1-877-849-1216 www.decalshoppe.comOnly when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.                                         -Cree Indian ProverbSA 200 LincolnVictor Torches
Reply:I see your from Carlsbad, I used to do a lot of springs riding my Harley out in that aera.One comes to mind when my buddy droped a valve 40 miles west of Jal, that was a interesting day.1990 SA 200Miller 225  Rip Miller302Miller 135Lincoln 200 MigHypertherm 600 PlasmaPlasma Cam Cutting TableMikita Cold SawJL Welding Tx . com
Reply:Originally Posted by JLWeldingI see your from Carlsbad, I used to do a lot of springs riding my Harley out in that aera.One comes to mind when my buddy droped a valve 40 miles west of Jal, that was a interesting day.
Reply:That looks great!I think it's all in the skill applying the paint.  Most paints are pretty much equal in a certain quality range.Nice wet look like you have is all about the painter"Any day above ground is a good day"http://www.farmersamm.com/
Reply:You wouldnt wont to sale it would you? That way you could go down and buy you one with a real slick factory paint job. That way your wife dont have to ride on that bunge cord holding the seat down. And parts are readly found you dont have to wait for days on the right parts coming in and all that. I hope this helps you out there.1990 SA 200Miller 225  Rip Miller302Miller 135Lincoln 200 MigHypertherm 600 PlasmaPlasma Cam Cutting TableMikita Cold SawJL Welding Tx . com
Reply:Already sold it in the early '90's. I built this from a basket case. 1953 bottom end, 1978 top end on a 1965 juice frame. Another photo shows the suicide shift. I built the tabs for the gas tanks and the floorboards and welded them to the frame, Bought the frame and the wide glide separate from the basket as it suffered a head on collision prior to my purchase.  Attached ImagesOnly when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.                                         -Cree Indian ProverbSA 200 LincolnVictor Torches