Welding Rig, Serious 4X4, in Louisiana

admin

Just found this on Goverment Liquidations web site.  It's a GMC, big truck, 4X4, utility body, auto crane, Hobart welder, A/C.  Front winch.  This would make a serious off road welding rig.  Located at Fort Polk, LA.  I posted 4 pics, many more on the item site.Bidding starts on 2/24, end 2/29.Event ID: 3972Lot # 7600http://www.govliquidation.com/ Attached Images
Reply:Man you are seriously off the road if you need that..lol. But when you get stuck, your stuck!! I went to the site, they have 29 pics of it. Just click on the first picture and more will pop up. You can then scroll through them. http://cgi.govliquidation.com/auctio...&convertTo=USD thats the websiteLast edited by Tamper84; 02-16-2009 at 01:21 PM.
Reply:Holy carp, that's a big one!MM350P/Python/Q300MM175/Q300DialarcHFHTP MIG200PowCon300SMHypertherm380ThermalArc185Purox oaF350CrewCab4x4LoadNGo utilitybedBobcat250XMT304/Optima/SpoolmaticSuitcase12RC/Q300Suitcase8RC/Q400Passport/Q300Smith op
Reply:Originally Posted by Tamper84Man you are seriously off the road if you need that..lol. But when you get stuck, your stuck!! I went to the site, they have 29 pics of it. Just click on the first picture and more will pop up. You can then scroll through them. http://cgi.govliquidation.com/auctio...&convertTo=USD thats the website
Reply:It is not often you see that size truck with 4X4 but i like it.American by birth Southern by the Grace of God
Reply:Tell me about paweldor. I used to work for an strip mine coal company. I had a GMC C6500 with an auto crane bed on it and sometimes I wished it had four wheel drive. Its pretty bad when I had to have a dozer pull me up the haul road..lol
Reply:Originally Posted by Tamper84Tell me about paweldor. I used to work for an strip mine coal company. I had a GMC C6500 with an auto crane bed on it and sometimes I wished it had four wheel drive. Its pretty bad when I had to have a dozer pull me up the haul road..lol
Reply:I wish I had a picutre of the biggest one I seen. It was an old beat up IH loadstar all six axles were drive axels and you could lock each one together, we had fun pulling around big rocks with it..lol
Reply:it looks like it might be  agood deal for somebody. migth take a bit of money to get back in working shapeinsert thoughtful quote from someone else2000 Thermal Arc 300GTSW 3.5 hours1946 Monarch 20 x 54 Lathe1998 Supermax 10x54 Mill2004 Haco Atlantic 1/2" Capacity Lasernot mine but i get to play with it
Reply:This rig goes off in just a few minutes.  Bidding up to $5417.00
Reply:Sorry, I misread the date.  It doesn't go off until 5 PM  EST  2/26/09.
Reply:Rig sold for $13,500.00