Syncrowave 250 with Coolmate 3

admin

I have a Miller Syncrowave 250 for sale. Looking to get around $2,700 for this setup. It is a mid 90s model but not sure on exact build date. Everything works perfectly. Coolmate 3 with 25' profax watercooled torch. Various sizes of collets, bodies, tungsten, and filler. I can get pics of whatever is needed. Im located in Charlotte NC and machine is hooked up if anyone local wants to come by and try it out. You can email me at [email protected] or [email protected] CWI/CWEASNT NDT Level 2 PT/MTAWS Certified Welder(aerospace)
Reply:Sure wish you were a little closer to Washington State!  I have been looking for one of these in my area.  If you want to know when your machine was manufactured, write down the first four characters of your Serial Number, and compare them to this chart on Millers Website: http://www.millerwelds.com/service/s...reference.html .  With the first four characters of your S/N you can nail down the date of manufacture of any Miller product within six months.  On the topic of Serial Numbers, you should include the S/N with your posting to establish credibility as a seller.  Any responsible internet seller should voluntarily post the S/N for all the world to see. The logic being, that if you are willing to post the S/N, you are saying that you know the equipment is not "Stolen Merchandise".  Besides, any serious buyer will ask for the S/N first, before any negotiations begin.  Just a friendly suggestion."I am convinced that the "life-blood" of all electronic hardware is not electrons, but "smoke".  I know this because no piece of electronic hardware has ever been revived after it has "lost a lot of smoke!!"Acclim8
Reply:Originally Posted by Acclim8Sure wish you were a little closer to Washington State!  I have been looking for one of these in my area.  If you want to know when your machine was manufactured, write down the first four characters of your Serial Number, and compare them to this chart on Millers Website: http://www.millerwelds.com/service/s...reference.html .  With the first four characters of your S/N you can nail down the date of manufacture of any Miller product within six months.  On the topic of Serial Numbers, you should include the S/N with your posting to establish credibility as a seller.  Any responsible internet seller should voluntarily post the S/N for all the world to see. The logic being, that if you are willing to post the S/N, you are saying that you know the equipment is not "Stolen Merchandise".  Besides, any serious buyer will ask for the S/N first, before any negotiations begin.  Just a friendly suggestion.
Reply:Ok I finally got to the shop to get the serial number off of the machine. If anyone needs pictures let me know. Machine doesnt have running gear but it is on a dolly. Serial# KF890612. Lists it as a 1995 model. It welds perfectly.  Will take $2,600 or make me an offer. Thanks.AWS CWI/CWEASNT NDT Level 2 PT/MTAWS Certified Welder(aerospace)
Reply:someone make me an offer??AWS CWI/CWEASNT NDT Level 2 PT/MTAWS Certified Welder(aerospace)
Reply:I want your coolmate only.   weld it like you own it
Reply:i may split it up not sure yet....i really wanted to keep it all together.AWS CWI/CWEASNT NDT Level 2 PT/MTAWS Certified Welder(aerospace)