|
|
Put this together for the lift guys....It's the newest in Above ground pool lift parts....Its a big part, 20x20x 5/8 Plate.... Miller Dynasty 350Twenty Six HammersThree Crow BarsBig Rock
Reply:Looks awesome. MIG or TIG?Preheat?Miller Dynasty 200DXMiller Spectrum 250DMiller Millermatic 200Bunch of old blue dinosaurs....
Reply:Whoa, careful with that thread title! Big Brother is watching and he has a lousy sense of humor. A few weldersA lot of hammersA whole lot of C-clamps
Reply:Very nice. I'm going to say tig, because my mig welds on something like that would not look nearly as good
Reply:Ha ! Had to click on that !. Flashback of the old Herc-Nike daze when I was a flag waving meathead Bubble gumTooth pixDuct tapeBlack glueGBMF hammerScrew gun --bad battery (see above)
Reply:Nice Bill. How many are you going to do?Weld like a "WELDOR", not a wel-"DERR" MillerDynasty700DX,Dynasty350DX4ea,Dynasty200DX,Li ncolnSW200-2ea.,MillerMatic350P,MillerMatic200w/spoolgun,MKCobraMig260,Lincoln SP-170T,PlasmaCam/Hypertherm1250,HFProTig2ea,MigMax1ea.
Reply:Not sure Terry, this is a proto type to see what we need to get the above ground pools equipped with a lift....If it works who knows I suggested using steel and MIG them Miller Dynasty 350Twenty Six HammersThree Crow BarsBig Rock |
|
发表于 2021-8-31 22:40:22