Looking for a Welding Truck

admin

I will most likely make my own bed but...I will at least put this out there.I am looking for a Truck and complete set up. Price depends on quality. And somewhat close to Utah. Thanks, Troy.WHAT DOES NOT KILL US, MAKES US STRONGER...http://www.myspace.com/painter22
Reply:There are a few welding trucks for sale on the AWS forum.  www.aws.orgMM350P/Python/Q300MM175/Q300DialarcHFHTP MIG200PowCon300SMHypertherm380ThermalArc185Purox oaF350CrewCab4x4LoadNGo utilitybedBobcat250XMT304/Optima/SpoolmaticSuitcase12RC/Q300Suitcase8RC/Q400Passport/Q300Smith op
Reply:You get a truck yet?  I'm getting ready to get rid of mine - its a 2006 Ford F450 XLT 4x4 Super Duty with 34,000 miles on it.  I can send pics if you're interested.  I'm in Wyoming.
Reply:I would like to see pics, Looking for ideas on building one myself.
Reply:look on ebay Attached Images
Reply:Mines on ebay 92 ford f450 but its in MO check it out you might get some ideas though
Reply:Try the AWS for sale section.  Full rigs pop up on there from time to time!  http://www.aws.org/cgi-bin/mwf/board_show.pl?bid=4
Reply:Ed, that is one sweet truck, for the work im going to do, its a little more.....Thats a problem with ebay is buing a vehicle too far away, but id be willing to travel if needed.I will be getting the truck this week.WHAT DOES NOT KILL US, MAKES US STRONGER...http://www.myspace.com/painter22
Reply:That is a nice truck but texas truck center wants top dollar for them. I like a taller box and would like to see the welder off the back, with a work bench bumper. Also personally I like knuckleboom cranes for a welding truck, you can push and pull.
Reply:Originally Posted by adam21584I would like to see pics, Looking for ideas on building one myself.
Reply:We can rig you up man and get you out there in style.http://www.atecdiversified.com/page35.htmlBurning Rods and Building Custom Truck [email protected]
Reply:If you've got the money Wilcox or IMT will build you whatever you want.Here's a few picts of my general work truck I had Wilcox do for me. Fully custom 11' bed is widened to 60" inside, boxes raised to 60" on sides so I can store bottles in any of the side boxes if I choose. Custom door layout and adj shelves. I skipped the crane mount as I wanted a roof. 3 piece sliding roof with 2 shelf riser  (62" inside ht. at lowest point) so I can access the roof rack to be done later as well as have the ability to load the genset/welder with the crane at my buddies shop. Doors over, tailgate so I can have long lengths stick out with out the doors open. Reinforced sidewalls so I could do D ring tie downs where I wanted. They had an awesome work bumper I would have loved with receivers for vise mounting and clamping edges, but it made the whole truck longer than I wanted so I passed on that option. It's plumbed to do a hydraulic system like for swaging hoses, jacks or running a compressor, from the PTO,but I didn't have any system installed due to costs at the time. Attached Images.No government ever voluntarily reduces itself in size. Government programs, once launched, never disappear. Actually, a government bureau is the nearest thing to eternal life we'll ever see on this earth! Ronald Reagan
Reply:hey there check out my rig for sale if your still lookin.THANKSSTEELMAN