Got on the machinists "good side :D

admin

First off, I owe this whole thing to CJ_978 as it was his post that gave me the idea. But as they were not for sale and I really, really, really liked it. I got the machinist to turn one up on the lathe for me today. Still have to polish it, add a tungsten and drill a hole for the key ring. To be clear up front: I have no intents on reproducing or selling this, unless CJ is ok with it. So with that said:
Reply:I like it! Going to make it a key chain or an ornament? Being on the machinists good side is always good, they like doughnuts and lunch from time to time.
Reply:Originally Posted by northern50I like it! Going to make it a key chain or an ornament? Being on the machinists good side is always good, they like doughnuts and lunch from time to time.
Reply:Got the hole drilled in for the ring. Probably going to get lazy and not polish it. Lol. It's still cool in my book. Sent from my SGH-T989 using Tapatalk
Reply:That's a cool key ring! Nice work
Reply:Very nice
Reply:Should cut a notch into the side of the handle to make it a bottle opener.
Reply:To bad the weld looks horrible.I hate being bi-polar it's awsomeMy Heroes Have Always Been Cowboys
Reply:Originally Posted by Firemanmike69That's a cool key ring! Nice work
Reply:No need to drink ! From the diameter it'll make a fine tamper for the bong. Bubble gumTooth pixDuct tapeBlack glueGBMF hammerScrew gun --bad battery (see above)
Reply:Originally Posted by BurpeeNo need to drink ! From the diameter it'll make a fine tamper for the bong.
Reply:i want one Welding/Fab Pics: www.UtahWeld.com
Reply:I want one too. With the bottle opener option please. I have a Mazak lathe that could spit those out at about 40 seconds for the handle, including the cross hole. Stainless steel. Nozzle part would take more than twice as long as I would make the tungsten as part of the turning. A lot faster in brass. That lathe is set up as a bar feeder and runs un attended.NO, not going to produce them.
Reply:Looks cool!  Many moons ago, I saw a key chain made into a chipping hammer that a guy had at a trade show.  It was anodized blue and looked really neat. "Hey I didn't come to look and learn, I came to turn and burn.... If I can't light up, I'm gonna light out!"-JodyIdealarc 250 "Fatman"MM 252MM 211 "Little boy" Victor Torches
Reply:That's awesome!!!
Reply:That's awesome, I love the idea!!I want to make one.... I can have it made up in no time on the HAAS!!! Proverbs 4:23My company welds.
Reply:Very nice.
Reply:Originally Posted by Sputter FizzleI want one too. With the bottle opener option please. I have a Mazak lathe that could spit those out at about 40 seconds for the handle, including the cross hole. Stainless steel. Nozzle part would take more than twice as long as I would make the tungsten as part of the turning. A lot faster in brass. That lathe is set up as a bar feeder and runs un attended.NO, not going to produce them.
Reply:I saw one a guy made bud and he blued the end of the cup with some heat. It looked mad cool, but would scratch right off obviously if not protected with something. Looked slick tho brother. Just something to think about. Or feel free to tell me to shut up and mind my business.  I hate being bi-polar it's awsomeMy Heroes Have Always Been Cowboys
Reply:Originally Posted by weldermikeI saw one a guy made bud and he blued the end of the cup with some heat. It looked mad cool, but would scratch right off obviously if not protected with something. Looked slick tho brother. Just something to think about. Or feel free to tell me to shut up and mind my business.
Reply:A larger version with the handle bored out with a threaded cap would make a bad *** tungsten holder.
Reply:Originally Posted by Arizona SA200A larger version with the handle bored out with a threaded cap would make a bad *** tungsten holder.
Reply:I am a machinist and a welder and I can't seem to get on the good side of either one...How heavy is that thing anyway?...zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a  dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:Originally Posted by dcoffmanjrWell, gotta go buy a few more doughnuts for the machinist..... I'll draw it up in CAD, and have it turned Monday. Sent from my SGH-T989 using Tapatalk
Reply:gotta have the tungsten with the appropriate amount of stickout!  Can I order mine with a gas-lens option, water cooled please!   1st on WeldingWeb to have a scrolling sig! HTP Invertig 400HTP Invertig 221HTP ProPulse 300HTP ProPulse 200 x2HTP ProPulse 220MTSHTP Inverarc 200TLP HTP Microcut 875SCOriginally Posted by zapsterI am a machinist and a welder and I can't seem to get on the good side of either one...How heavy is that thing anyway?...zap!
Reply:I'm a field guy so i need a valve on mine. Also prefer the flex head. 26vf for me with a jumbo gas lens and #12 cup.
Reply:Actually make mine a functional rotating head like my newest TIG torch:That would be sick, and I would pay top-dollar!  Up to $15 LOL 1st on WeldingWeb to have a scrolling sig! HTP Invertig 400HTP Invertig 221HTP ProPulse 300HTP ProPulse 200 x2HTP ProPulse 220MTSHTP Inverarc 200TLP HTP Microcut 875SC
Reply:Wow, you guys are tough!  Sent from my SGH-T989 using Tapatalk