items for sale

admin

I recently posted some items for sale, for my aunt,, I am not a welder so I do not know much about these things.  Could someone give me a good price range for the following?????Lincoln Idealarc 250-250,,,  puts out about 350 amps?Miller HF 250-1 arc stabalizer,, and a Westinghouse, AC DC+ DC- straight/reverse controller!Would really appreciate some input,, and thanks a lot! Attached ImagesLast edited by fuzzykjun; 04-02-2010 at 10:05 PM.Reason: thank yous
Reply:HF 251, that is a hi freq, correct? How much for that and how much for the Lincoln?"Where's Stick man????????" - 7A749"SHHHHHH!! I sent him over to snag that MIC-4 while tbone wasn't looking!" - duaneb55"I have bought a few of Tbone's things unlike Stick-Man who helps himself" - TozziWelding"Stick-man"
Reply:If you were to read my question carefully you would see that I was asking the pros here how much I should ask for these items,,, secondly,, IT IS NOT a 251!!!  IT IS an HF 250!I will take any reasonable offer,  even if its a couple of hundred below normal prices,,be fair with me and you will get a great deal!Last edited by fuzzykjun; 04-03-2010 at 03:24 PM.
Reply:Be an a$$ then see if anyone will help you.
Reply:Who's being an ***,, I simply informed him of his errors!  Its people like you who can't read that ruins things for others, if you won't help I could care less, don't put your negative attitude were it is not needed or wanted!!  I merely asked for help, you are starting an issue.  Stay off my thread!  A 26 year old kid knows nothing yet wants to show everyone how smart he is.....Last edited by fuzzykjun; 04-03-2010 at 11:24 PM.
Reply:fuzzy, i think you could tone it down a little. you're coming off a little harsh.Dynasty 200DXPassport plus w/ spoolmate 100victor 315c oxy/(act and prop)Miller digital elitemilwaukee power tools
Reply:I'll offer up some figures based on what I've seen fuzzykjun.Lincoln 250: $2-400.00HF250-1: (W/ torch and cables) $6-800.00Westinghouse controller: Not familiar with it but I'd wager a guess at $150-200.00 at best.MM200 w/Spoolmatic 1Syncrowave 180SDBobcat 225G Plus - LP/NGMUTT Suitcase WirefeederWC-1S/Spoolmatic 1HF-251D-1PakMaster 100XL '68 Red Face Code #6633 projectStar Jet 21-110Save Second Base!
Reply:Do you have the cables? What shape?Tim Beeker.
Reply:Originally Posted by duaneb55I'll offer up some figures based on what I've seen fuzzykjun.Lincoln 250: $2-400.00HF250-1: (W/ torch and cables) $6-800.00Westinghouse controller: Not familiar with it but I'd wager a guess at $150-200.00 at best.
Reply:I believe my post was "on topic". Kinda hard to value stuff with very limited info. Cables do make a difference.OP, any idea of working condition?Tim Beeker.
Reply:tnjind,  it is still hooked up in operational condition,,, there are cables everywhere as he liked to work outside.. the shope was too small for the dozers and graders he worked on!   He had to quit working about four years ago so its all been sitting there since but should still be operational.  some of the ground cables looked a little frayed and cracked, not sure about the others as they are blocked by a lot of her childrens junk.  They are using the shop as a storage area... anyway,, your prices are in line with I was thinking,, thank you for your assistance...
Reply:turk,, why are downing on me and no mention of the fact that the yo-yo thornhill threw in his un-necessary comment about asses?? Who started this?  you are another 26 year old that still knows nothing but has to chime in with uncalled for  comments.  I merely stated that another person should read my input more carefully and you two start **** because you are too uneducated to read English!Thanks to everyone else who put in the proper finformation I was looking for,  HAPPY EASTER!
Reply:I would say about 80% of Duane's values in this area.Tim Beeker.
Reply:Duane was right on the money with estimated prices.At a recent farm auction I saw a similiar Lincoln IdealArc 250  sell for $625 with cables. To prove it worked the auctioneer fired her up and stuck an arc.Same auction a Miller 250 with cables, powered up but auctioneer did not get torch to fire sold for $300.I am not personally familiar with the Westinghouse unit but we have had a couple of members with similiar looking units. You could keyword search Westinghouse welder and see what comes up. A search of westinghouse http://weldingweb.com/search.php?searchid=1279124 turned up 3 pages of search posts.Last edited by specter; 04-04-2010 at 11:53 AM.Co-Own CNC shop:Miller :1251 plasma cutter, MaxStar 700 TIG/Stick, & XMT 456 Multiprocess Welder.&  2 Hypertherm HPR260's Plasma CutterSorry I had a bad stroke but now I am back.
Reply:I'd give you $250 + shipping for the miller HF unit.unless you're promising it works perfect...
Reply:do you still have the idealarc