My New Shop!

admin

Hey guys, I just got my new shop and I am lovin it! Here's a link to my video of it. Enjoy! Hobart 125 EZHobart Handler 140Everlast STH 160Generic 210 Amp Welder/GeneratorHobart Air Force 500i plasma cutterChinese 50 amp plasma cutter! Youtube Channel : Henrymac100
Reply:Lots of room now and a huge step up from what you had ....trust me on this ,its only a matter of time before you will have it full.My shop was empty at first....
Reply:That is gonna be really nice. Now you have all kind of goodies to build ! When I connected my air compressor , I used a hydraulic hose from compressor outlet to pressure regulator and piping. The hose works as a vibration eliminator .  SOOOOOOOOOO, what you building FIRST ?
Reply:I love that.You really should have made it 40x40.My shop (when I build it) is gonna be a minimum of 100'x100' with 12x12 doors. Your shop will fill up fast.Good luck.Just a couple welders, big hammers, grinders, and torches.Work will free you.Men in dirty jeans built this country, while men in clean suits have destroyed it. Trump/Carson 2016-2024
Reply:WOOOOOOOOOO!!!! Thank's for sharing your exitment...what a feeling
Reply:Very nice congrats.What's the price tag on something like that?
Reply:Nice, can you insulate it ?brad
Reply:Originally Posted by BrooklynBravestVery nice congrats.What's the price tag on something like that?
Reply:Originally Posted by Brad NNice, can you insulate it ?brad
Reply:Originally Posted by HenrymacThats a good question. I have been wondering that myself. The matter is under investigation.
Reply:Not to lay an egg on your parade, but, why have a secure, lockable door with the hinge pins on the OUTSIDE.Hammer and nail and the door is off in less than 15 seconds.on edit, sorry, just noticed that is the door to the old shop. (lean too)My bad.
Reply:Not big enough.My name's not Jim....
Reply:There are security hinges that have the pins on the outside but they have set screws inside . You have to open the door , loosen the set screw, and then pop the pin out. If not then you spend the next couple of hours getting the riveted pin out and repairing the hinge. The lessons learned the hard way are the ones we remember the most.Really nice shop Enjoy
Reply:Originally Posted by BoostinjdmNot big enough.
Reply:Congrats. Huge improvement. Sent from my iPhone using TapatalkLincoln Pro Mig 180HF Stick/Tig Inverter WelderLincoln AC225s
Reply:Very nice!
Reply:You did good.  Congrats
Reply:A guy can never have enough space, i work out of 1500sq ft and put two project cars a small truck and an old landcruiser in there along with fab equipment, and space is limited! Great upgrade from what you were using.SeanMillermatic 210Esab 450IThermal Arc 400 GTSW1972 SA200
Reply:Originally Posted by HenrymacHey guys, I just got my new shop and I am lovin it! Here's a link to my video of it. Enjoy!
Reply:Originally Posted by akatzFirst off, congrats on the new shop space! This may be a really stupid question, but at what point does one need to be concerned about confined space hazards with a small shop (like Henrymac's old shop)? 10x10, 6x6, 4x4?Sent from my iPhone using Tapatalk
Reply:Someone likes Hobart products.HH140---------------------------https://www.facebook.com/brandon.pike.9
Reply:That takes me down memory lane, this site does that quite often btw.  It was about forty years ago that I learned to weld, some things never change.life is good
Reply:Originally Posted by Br@ndoM@nSomeone likes Hobart products.