Land Welder looking to get into Underwater

admin

Quick question for you Underwater Welders. What where some of the ways y'all got into the field? I have been welding for close to 6 years. I'm a Union Ironworker. Looking to broaden the horizon if you know what I mean. How did y'all land some underwater welding gigs? Did y'all start with underwater welding school?
Reply:Spend $25k minimum and 6 months on school to get a $25k/yr dive tender job for a few years. Then maybe you might get a shot to make big money (when you are actually underwater for those few high paid hours, and no always welding, mostly NOT welding)Stick to your ironworker trade. Trust me, you're better off and making more than most "underwater welders" with experience already do.RyanMiller Multimatic 200 tig/spool gun/wireless remoteMillermatic 350P, Bernard/XR Python gunsMiller Dynasty 350, Coolmate 3.5 & wireless remoteCK WF1 TIG wire feederMiller Spectrum 375 XtremeOptrel e684Miller Digital EliteMiller Weld-Mask
Reply:I would wager there is not one single underwater welder on this site.
Reply:If it's dollars you're chasing go get some pipe training and go play in the oil-gas-water fields for six months a year.Work 7 x 12's and live with a bunch of other smelly bums in a crap house and bank damn near everything. Keep your dues paid for the Iron Hall too.....or sit on yer asz, work on race cars or ride motorcycles the other six months. Lots of options World Wide.
Reply:I’ve met guys at job sites who were trained for underwaterwelding. They work as divers but not welding. When I see them they’re scraping barnacles and mussels out of coolingwater intakes. Not the most glamorous job, but I was underthe impression they were well paid.Miller a/c-d/c Thunderbolt XLMillermatic 180 Purox O/ASmith Littletorch O/AHobart Champion Elite
Reply:Originally Posted by jpump5I’ve met guys at job sites who were trained for underwaterwelding. They work as divers but not welding. When I see them they’re scraping barnacles and mussels out of coolingwater intakes. Not the most glamorous job, but I was underthe impression they were well paid.
Reply:The guys I knew years ago were from n'orleans( a litle east) and they got paid by depth as to pay scale. Some of them Cajuns were down a couple hundred feet,bright lights. O2 via hoses, for limited time limits, obviously.They made BANK and worked a little, The rest of the time they were making shrimp boats and gadgets.hand woven nets for that sort of thing. Hard dudes. Good people tho. Homa or Houma ? Can't recall the little coastal town. Catch gators, spear frogs, gators, deers,turtles. Those kinds of guys. TOUGH. Airboats. ATC( 3 wheel Hondas). Guns within reach.Great food.All had those Catahoula dogs around. Maybe some day soon I'll visit. The family was Jenkins boys or Jennings. Can't recall.Easy enough to find. They were badaszes and good craftsman. I'm still sure the families are at it. It's all they knew.
Reply:Originally Posted by TimmyTIGI would wager there is not one single underwater welder on this site.
Reply:Originally Posted by TimmyTIGI would wager there is not one single underwater welder on this site.
Reply:Originally Posted by John TI know a few weldors underwater financially.
Reply:Underwater welding, been there, done that, got the tattoos to prove it. this was with the military so a bit different than commercial diving. I have friends that got out of the military and are working commercially. If you are already a welder, stick to surface welding especially if you are already in a union. As mentioned before, it will take 6 months of school, you will make crappy wages the first couple of years, pay is very location dependent, you will not have a steady paycheck, etc. One of my friends is in a union in NYC and has been working on pile wrapping the Tappanzee and other bridges. He is union but has not been working the last couple of months.Millermatic 252 MIGMiller Dynasty 200DX TIGMiller Spectrum 625 PlasmaAltas 12x36 Metal LatheBridgeport Milling Machinewww.psacustomcreations.com