BIG Sprocket plasma cut --WOW

admin

[ame]http://www.youtube.com/watch?v=FHUs_u27IpE&NR=1&feature=fvwp[/ame]Wish they had shown was it was going to be use for. Look how cleanly cut  the edges were....Weldandpower Lincoln 225 AC,DC with Briggs 16hp gas engine.WW2 era Miller TIG.
Reply:Wow. [Account Abandoned 8/8/16 Please Do Not Attempt Contact Or Expect A Reply]. See you on YouTube! -ChuckE2009
Reply:Big but it's pretty thin, must be for a bicycle or something like that. Most sprockets on machinery that I've seen or own are cast or possibly forged with a few exceptions like a round baler I have.HH 187Miller Bluestar1EAHP AlphaTig 200X
Reply:Could've been a decoration as well. I've seen clocks that look excactly like that
Reply:That looks like a Powermax45 hand torch....very nice cutting plasma. I have a PlasmaCam .....however I use a Powermax85 with a machine torch and a magnetic torch mount. It is a very productive, easy to use machine.  I also have a Torchmate 2x4 machine with a Powermax45 plasma.....get parts that are just as nice of that machine as well.Jim Colt Attached Images
Reply:I want a 5X10 PlasmaCam. But I would probably use a 2X4 Torchmate a lot more. How often do I really need to cut a full sheet of metal? But then I would have to shear everything down to 2x4....hmmmmLincoln Power Mig 210MP MIGLincoln Power Mig 350MP - MIG and Push-PullLincoln TIG 300-300Lincoln Hobby-Weld 110v  Thanks JLAMESCK TIG TORCH, gas diffuser, pyrex cupThermal Dynamics Cutmaster 101My brain