Weight of an idealarc TM 300/300

admin

Does anyone know what a tm 300/300 weighs?or should i ask would my ford ranger be wheezing up hills with the beast on board?Thanks for any helpFelonCaution lurker lives here" hmmm That is serious,pass the ganja and pick up a  24 of MGD"
Reply:My idealarc 250 is well over 300 lbs.The TM 300/300 is a larger machine that should weigh even more.JasonLincoln Idealarc 250 stick/tigThermal Dynamics Cutmaster 52Miller Bobcat 250Torchmate CNC tableThermal Arc Hefty 2Ironworkers Local 720
Reply:hi,it weight 780lbs bye mike2424.
Reply:mike2424 said "hi,it weight 780lbs"Thanks mike ,that should be no problem on the 4 cyl ranger however the pic shows one that slowed me down some.Felon Attached ImagesCaution lurker lives here" hmmm That is serious,pass the ganja and pick up a  24 of MGD"
Reply:Well its a big MF but not as bad as i thought to load .welds great but will need some cleaning up.Did some checking and its a 69 cdn model with the power factor capacitors.runs fine off my 220 setup as is so im happy.heres a pic will update later.Felon Attached ImagesCaution lurker lives here" hmmm That is serious,pass the ganja and pick up a  24 of MGD"
Reply:Yea well so what,sometimes i get a little carried away.Felon Attached ImagesCaution lurker lives here" hmmm That is serious,pass the ganja and pick up a  24 of MGD"
Reply:Nice flames and hypno-knob. lol.The soldering toys pay for the welding toys.Hakko 928 dual iron, 4xHakko 936Madell 850D Hot Air SMT ReworkMiller 252, HTP Invertig 201 AC/DC, and a Hypertherm 45.
Reply:Great job Felon!  I like it!A few of my toys !LinuxMintManjaroMiller Roughneck 2E Lincoln WeldPak 100HTP MTS 160 Chicago Electric 80amp Inverter   Victor O/A